Re: [coreboot] Using Intel e3800 pcu spi to program flash

[Graham Perkins]

Nico,
Thanks very much for your help. After upgrading my yocto recipe to use flashrom version 0.9.9 everything looks good.
Regards,
Graham

Vocality | Cubic Mission Solutions
Graham Perkins
Senior Software Engineer, Vocality | Cubic Mission Solutions
T: [phone] x154
E: [e-mail] | W: www.vocality.com
A: Lydling Barns, Lydling Farm,
Puttenham Lane, Shackleford,
Surrey, GU8 6AP

-----Original Message-----
From: Nico Huber [mailto:[e-mail]] 
Sent: 13 July 2017 4:55 PM
To: Graham Perkins ; [e-mail]
Subject: Re: [coreboot] Using Intel e3800 pcu spi to program flash

Hello Graham,

the SPI controller for the boot firmware is usually treated as sepa- rated from the OS and therefore not advertised in ACPI. AFAIK, Linux also doesn't have a driver for it.

We usually use flashrom [1] to access the firmware flash. It has a special programmer target called `internal` for that (see `man flashrom`).

Hope that helps,
Nico

[1] https://flashrom.org/

On 13.07.2017 13:26, Graham Perkins wrote:
> Hi All,
> I feel I am going around in circles with this problem. The task at hand is to be able to upgrade coreboot/uefi image in a winbond W25Q64 flash chip from linux. This chip is connected to the PCU SPI interface on the Intel e3805 processor. I know coreboot is writing to this chip without problem from the log:
>
> SF: Got idcode: ef 60 17 00 00
> SF: Detected W25Q64DW with sector size 0x1000, total 0x800000 Need to 
> erase the MRC cache region of 65536 bytes at ffd10000
> SF: erase 20 51  0  0 (511000)
> SPI: read 0080 from 0090
> SPI: wrote 000c to 0090
> SPI: wrote 06 to 0098
>
> However linux is not detecting the flash device or the PCH SPI controller. Disassembling the dsdt table I can see e3800 soc devices such as the HPET and PIC but no PCH SPI. The only SPI device is part of the SIO:
>             Device (SPI1)
>             {
>                 Name (_HID, "80860F0E" /* Intel SPI Controller */)  // _HID: Hardware ID
>                 Name (_UID, One)  // _UID: Unique ID
>                 Name (_DDN, "SPI Controller #2")  // _DDN: DOS 
>
> Device Name
>
> My question is does coreboot need to include the PCU SPI controller in the acpi tables and if so how do I do that?
>
> The platform is a custom design but very similar to the Intel Minnow Turbot board.
>
> Many thanks,
> Graham Perkins.