[coreboot] Fwd: Problem with boot coreboot

[Mike Banon]

Forwarding this message:

I used a flash MBR .
with this form
=>      63  15730625  da0  MBR  (7.5G)
        63      1985       - free -  (993K)
      2048  15728640    1  ntfs  [active]  (7.5G)

But It did not work and it shows  previous  message again.

Could you guide me ؟

Thanks
Zahra

On Tue, Aug 7, 2018 at 11:40 PM zahra rahimkhani
 wrote:
> Thank you very much for your help.
> could you tell me how to repairhatd driver ?
>
> Thanks ,
>
> On 07/08/2018 7:59 PM, "Mike Banon"  wrote:
> > Have you tried repairing the bootloader at your hard drive?
> > are you using GRUB2, and your partitions are MBR or GPT?
> > (SeaBIOS supports MBR only, so GRUB2 needs to be installed to MBR)
> >
> > On Tue, Aug 7, 2018 at 11:13 AM, zahra rahimkhani
> >  wrote:
> > > Hello friends
> > >
> > > I compiled coreboot and seabios based on
> > > https://review.coreboot.org/cgit/board-status.git/plain/intel/minnowmax/4.5-...
> > >
> > > but my Freebsd  did not boot and show this message.
> > >
> > > Running option rom at c000:0003
> > > Turning on vga text mode console
> > > SeaBIOS (version rel-1.11.2-0-gf9626cc)
> > > EHCI init on dev 00:1d.0 (regs=0xd061e020)
> > > WARNING - Timeout at i8042_flush:71!
> > > AHCI controller at 00:13.0, iobase 0xd061d000, irq 10
> > > Searching bootorder for: /pci@i0cf8/*@12
> > > Found 0 lpt ports
> > > Found 1 serial ports
> > > Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/storage@1/*@0/*@0,0
> > > Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/usb-*@1
> > > USB MSC vendor='UFD 2.0' product='Silicon-Power8G' rev='1100' type=0
> > > removable=1
> > > USB MSC blksize=512 sectors=15730688
> > > Initialized USB HUB (1 ports used)
> > > All threads complete.
> > > Scan for option roms
> > >
> > > Press ESC for boot menu.
> > >
> > > Searching bootorder for: HALT
> > > drive 0x000f62c0: PCHS=0/0/0 translation=lba LCHS=979/255/63 s=15730688
> > > Space available for UMB: cd800-ed800, f5b60-f62c0
> > > Returned 253952 bytes of ZoneHigh
> > > e820 map has 18 items:
> > >   0: 0000000000000000 - 000000000009fc00 = 1 RAM
> > >   1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
> > >   2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
> > >   3: 0000000000100000 - 0000000020000000 = 1 RAM
> > >   4: 0000000020000000 - 0000000020100000 = 2 RESERVED
> > >   5: 0000000020100000 - 000000007ad9c000 = 1 RAM
> > >   6: 000000007ad9c000 - 0000000080000000 = 2 RESERVED
> > >   7: 00000000e0000000 - 00000000f0000000 = 2 RESERVED
> > >   8: 00000000feb00000 - 00000000fec01000 = 2 RESERVED
> > >   9: 00000000fed01000 - 00000000fed02000 = 2 RESERVED
> > >   10: 00000000fed03000 - 00000000fed04000 = 2 RESERVED
> > >   11: 00000000fed05000 - 00000000fed06000 = 2 RESERVED
> > >   12: 00000000fed08000 - 00000000fed09000 = 2 RESERVED
> > >   13: 00000000fed0c000 - 00000000fed10000 = 2 RESERVED
> > >   14: 00000000fed1c000 - 00000000fed1d000 = 2 RESERVED
> > >   15: 00000000fee00000 - 00000000fee01000 = 2 RESERVED
> > >   16: 00000000fef00000 - 00000000ff000000 = 2 RESERVED
> > >   17: 00000000ff800000 - 0000000100000000 = 2 RESERVED
> > > enter handle_19:
> > >   NULL
> > > Booting from Hard Disk...
> > > Booting from 0000:7c00
> > >
> > > I would be grateful if you guide me .
> > >
> > > Thanks,