Hi, I am trying to use linuxbios+etherboot+filo to boot from usb stick. I use etherboot-5.2.4_btext_filo_usb.diff.bz2(Thanks, sjames). But the filo can't boot my kernel, below is th output:
boot: uda1:/bzImage LinuxLabs USB bootloader New USB device, setting address 2 00000008:00000005:00000050 Manufacturor: USB Product: B�������� Serial: ��������~? boot: uda1:/bzImage
Then I enable the debug info:
[FILO]boot eax = 0xfbffffff boot ebx = 0xffffffff boot arg = 0xffffffff FILO version 0.4.1 (beatms@beatms) 2004Ä�� 09ÔÂ07ÈÕÐÇÆÚ¶þ Press <Enter> for default boot, or <Esc> for boot prompt... 2 1 timed out boot: uda1:/bzImage dev=uda1, path=/bzImage LinuxLabs USB bootloader Found UHCI at 00001c00 Resetting UHCI uhc_init setting framelist to: 036a5d10 Starting UHCI HCI at 00001c00 Found UHCI at 00001c20 Resetting UHCI uhc_init setting framelist to: 036a5d10 Starting UHCI HCI at 00001c20 frame_list is at ffffe2f0 frame_list_link: addr: 00058270 frame_list_link: raw addr: 036fdf80 frame_list_link: terminate: 00000000 frame_list_link: queue: 00000001 frame_list_link: depth: 00000000 frame_list is at ffffc2f0 frame_list_link: addr: 00058290 frame_list_link: raw addr: 036fdfa0 frame_list_link: terminate: 00000000 frame_list_link: queue: 00000001 frame_list_link: depth: 00000000 poll_usb1 i=0 poll_u_root_hub1 v=00000580 poll_u_root_hub1 v=00001493 poll_u_root_hub2 v=00001493 poll_u_root_hub21 v=00001493 Connection on port 00001c12 New USB device, setting address 2 uhci_control_msg: request_type = 00000000 request = 00000005 wLength=0 HCI at 00001c00 failed_transaction: TD(00050280): failed_transaction: type: SETUP failed_transaction: retries: 00000003 failed_transaction: IOC failed_transaction: active: 00000001 failed_transaction: device_addr: 00000000 failed_transaction: endpoint: 00000000 failed_transaction: data_toggle: 00000000 failed_transaction: max_transfer: 00000007 failed_transaction: actual: 00000000 failed_transaction: link: failed_transaction: ²ÿÿaddr: 000502a0 failed_transaction: ²ÿÿ raw addr: 036f5fb0 failed_transaction: ²ÿÿterminate: 00000000 failed_transaction: ²ÿÿqueue: 00000000 failed_transaction: ²ÿÿdepth: 00000000 failed_transaction: TD(000502a0): failed_transaction: type: IN failed_transaction: retries: 00000000 failed_transaction: active: 00000001 failed_transaction: device_addr: 00000000 failed_transaction: endpoint: 00000000 failed_transaction: data_toggle: 00000001 failed_transaction: max_transfer: 000007ff failed_transaction: actual: 00000000 failed_transaction: link: failed_transaction: addr: fc95a2f0 failed_transaction: raw addr: 00000000 failed_transaction: terminate: 00000001 failed_transaction: queue: 00000000 failed_transaction: depth: 00000000 configure_device: set_address failed! poll_usb1 i=1 poll_u_root_hub1 v=00000180 poll_u_root_hub1 v=00000080 poll_usb1 i=0 poll_u_root_hub1 v=00000580 poll_u_root_hub1 v=00000493 poll_u_root_hub2 v=00000493 poll_u_root_hub21 v=00000493 Connection on port 00001c12
The usb stick works properly in lb+eb. What do above info mean and what should I do?
Thanks a lot!
_________________________________________________________________ �����������ѽ��н�������ʹ�� MSN Messenger: http://messenger.msn.com/cn