http://sourceforge.net/tracker/index.php?func=detail&aid=943300&grou... 3&atid=304233
-----邮件原件----- 发件人: YhLu 发送时间: 2004年5月13日 10:05 收件人: Jay Miller; linuxbios@clustermatic.org 主题: 答复: Making payloads
Jay,
I have merged into FILO into Etherboot. You can get that patch from Etherboot group. So you can build tg3--filo.zelf. About the PCI scan in Etherboot has no problem to find IDE other than bus 0.
Current it already supports serial IDE and normal IDE.
I'm working on add usb boot into FILO in Etherboot. The AMD8111 is using OHCI, and I'm trying to make use steven code for USB boot, but it is only support UHCI. OHCI has hardware support for ED (QH) instead of SW QH.
Maybe I need to get UHCI addon card at first.
Please let me know if you has problem to get filo patch. And I would send you my tar ball about filo in Etherboot.
Regards
YH
-----邮件原件----- 发件人: Jay Miller [mailto:jmiller@actuality-systems.com] 发送时间: 2004年5月13日 8:36 收件人: linuxbios@clustermatic.org 主题: Making payloads
The reason why my S2885 image wasn't working is because my system only has 1 CPU populated. A little tweaking to remove the second processor and I can get FILO to come up. Unfortunately FILO does not detect the IDE disk.
I noticed in the payloads section of Config.lb there are some multi-part payloads, like tg3--ide_disk.zelf, and tg3--filo.zelf.
How do I create the multi-part payloads? Ideally I would be interested in a FILO that recognizes IDE. Alternatively I am also pursuing a tg3 payload that will load my kernel over the network.
Thanks,
Jay Miller Actuality Systems, Inc. jmiller@acutality-systems.com
_______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios