On 6/1/10 5:47 PM, Alex Buell wrote:
OK, thanks for that one, I've now built CoreBoot and flashed it onto my MSI 6119 motherboard. Using serial console I can see the following
core-boot-4.0-r5601 Tue Jun 1 14:41:35 BST 2010 starting... SMBus controller enabled
Nothing else?
Can you enable CONFIG_DEBUG_RAM_SETUP in Kconfig and reflash?
I have the SeaBIOS built as a payload. The strange thing is that there seems to be no video. I'll try swapping graphic cards out and see if I can get video.
No need. It dies long before it could even theoretically attempt to initialize VGA according to above log.
Can the serial console be used as a way to reload firmware if necessary?
Not at this point.
Stefan