Re: [coreboot] Booting Geode LX processor autonomously

[Peter Stuge]

On Wed, May 21, 2008 at 12:57:33PM +0200, llandre wrote:
> > > When I disconnect the JTAG debugger and set irq13 to 0 to let the
> > > processor to boot from the LPC dongle flash, it does not boot. Do
> > > I need to perform other operations to let it boot autonomously?
> >
> > No, it should work without changes.
> >
> > But how do you provide power to the dongle?
>
> My Artec dongle is powered externally via USB cable so, when
> processor tries to fetch boot code, FPGA should be already up and
> running.
> However I noted that R26 on dongle in not mounted thus RESET coming
> from processor board is not connected to the reset monitor. Is that
> ok?

Hm. I did have to reset the dongle manually after flashing it, but
otherwise I did not have any reset issues.

//Peter