I built tg3--filo.zelf with the latest patch from the link in your message.
Getting the follow error message when loading:
Loading Etherboot version: 5.2.4 Dropping non PT_LOAD segment New segment addr 0x20000 size 0x4aef5 offset 0xb0 filesize 0xa4b7 (cleaned up) New segment addr 0x20000 size 0x4aef5 offset 0xb0 filesize 0xa4b7 Loading Segment: addr: 0x000000001ffadfe8 memsz: 0x000000000001b00c filesz: 0x00 0000000000a4b7 Clearing Segment: addr: 0x000000001ffb849f memsz: 0x0000000000010b55 Loading Segment: addr: 0x000000000003b00c memsz: 0x000000000002fee9 filesz: 0x00 00000000000000 39:stream_skip() - overflowed source buffer ERROR: Skip of 68437 bytes skiped 23193 bytes Cannot Load ELF Image
What am I doing wrong?
-J
-----Original Message----- From: YhLu [mailto:YhLu@tyan.com] Sent: Thursday, May 13, 2004 1:22 PM To: Jay Miller; linuxbios@clustermatic.org Subject: 答复: Making payloads
http://sourceforge.net/tracker/index.php?func=detail&aid=943300&grou... 3&atid=304233
-----邮件原件----- 发件人: YhLu 发送时间: 2004年5月13日 10:05 收件人: Jay Miller; linuxbios@clustermatic.org 主题: 答复: Making payloads
Jay,
I have merged into FILO into Etherboot. You can get that patch from Etherboot group. So you can build tg3--filo.zelf. About the PCI scan in Etherboot has no problem to find IDE other than bus 0.
Current it already supports serial IDE and normal IDE.
I'm working on add usb boot into FILO in Etherboot. The AMD8111 is using OHCI, and I'm trying to make use steven code for USB boot, but it is only support UHCI. OHCI has hardware support for ED (QH) instead of SW QH.
Maybe I need to get UHCI addon card at first.
Please let me know if you has problem to get filo patch. And I would send you my tar ball about filo in Etherboot.
Regards
YH
-----邮件原件----- 发件人: Jay Miller [mailto:jmiller@actuality-systems.com] 发送时间: 2004年5月13日 8:36 收件人: linuxbios@clustermatic.org 主题: Making payloads
The reason why my S2885 image wasn't working is because my system only has 1 CPU populated. A little tweaking to remove the second processor and I can get FILO to come up. Unfortunately FILO does not detect the IDE disk.
I noticed in the payloads section of Config.lb there are some multi-part payloads, like tg3--ide_disk.zelf, and tg3--filo.zelf.
How do I create the multi-part payloads? Ideally I would be interested in a FILO that recognizes IDE. Alternatively I am also pursuing a tg3 payload that will load my kernel over the network.
Thanks,
Jay Miller Actuality Systems, Inc. jmiller@acutality-systems.com
_______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios