Hi all,
After failing to load with both Etherboot and ADLO, I tried to reduce the size of kernel to 192k bytes ( which can only boot and execute simple command ) to fit into my 256k rom. But after "Jumping to boot code", it reboots. Does that mean my ram initialization is buggy ? Thanks. Below is my log :
regards, eehuey
Wrote linuxbios table at: 00000500 - 0000065c checksum 2d0c Jumping to linuxbiosmain()...
Welcome to start32, the open sourced starter. This space will eventually hold more diagnostic information. January 2000, James Hendricks, Dale Webster, and Ron Minnich. Version 0.1
37:init_bytes() - zkernel_start:0xfffc0000 zkernel_mask:0x0000ffff
Gunzip setup gunzip_setup output data is 0x00100000 Gunzipping boot code flush 0x00100000 count 0x00008000 flush 0x00108000 count 0x00008000 flush 0x00110000 count 0x00008000 flush 0x00118000 count 0x00008000 flush 0x00120000 count 0x00008000 flush 0x00128000 count 0x00008000 flush 0x00130000 count 0x00008000 flush 0x00138000 count 0x00008000 flush 0x00140000 count 0x00008000 flush 0x00148000 count 0x00008000 flush 0x00150000 count 0x00008000 flush 0x00158000 count 0x00008000 flush 0x00160000 count 0x00000b30 <990> command line - [root=/dev/hda5] Jumping to boot code
LinuxBIOS-1.0.0 Fri Jun 6 20:09:28 EDT 2003 starting... Ram1 Ram2 Ram3 Ram Enable 1 Ram Enable 2 Ram Enable 3 Ram Enable 4 Ram Enable 5 Ram4 Ram5 Ram6
Copying LinuxBIOS to ram. Jumping to LinuxBIOS.
_________________________________________________________________ Download the latest MSN Messenger http://messenger.msn.com.my