[LinuxBIOS] A boot problem....

[Huang-Jen Wang]

Dear all,
My linuxbios tried to boot the linux...but has a problem..hope you can
give me some advice...thanks....the message is follow:
.....
ollect_sys_info: 00000000000c0000-00000                                       
pci_init: 01:02.0 1166:0130 0604 00                                   
pci_init: 01:03.0 1166:0132 0604 00nt addr 0x1258e0 size 0x48 offset 0
pci_init: 01:04.0 1166:0132 0604 00                                   
pci_init: 01:05.0 1166:0132 0604 00n PT_LOAD segment                  
pci_init: 01:06.0 1166:0132 0604 000000000000100000 memsz: 0x000000000
pci_init: 01:07.0 1166:0036 0604 00                                   
pci_init: 01:09.0 1166:0223 0c03 10                                   
pci_init: 01:09.1 1166:0223 0c03 10       
00000000000048             
pci_init: 01:09.2 1166:0223 0c03 20                              
FILO
pci_init: 02:06.0 1000:0030 0100 00domain) Fri Jul 22 19:47:38 CST 200
pci_init: 03:04.0 14e4:1668 0200 00                                   
pci_init: 03:04.1 14e4:1668 0200 000xe1fb007                          
pci_init: 08:0d.0 1166:0104 0604 00ebx = 0x1ffe9420                   
Press <Enter> for default boot, or <Esc> for boot prompt... timed out
collect_linuxbios_info: Searching for L
boot: hda1:/vmlinuz-2.4.20-8 root=/dev/hda2 console=tty0
console=ttyS0,115200nd_lb_table: Found canidate at: 00000500
collect_linuxbios_info: Found LinuxBIOS tabl
find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4                    
convert_memmap: 0x000000000000
ide_software_reset: Waiting for ide0 to become ready for reset... ok     
convert_memmap: 0x00000000000de0 0x0000000009f220 1           
init_drive: Testing for hda            
convert_memmap
init_drive: Probing for hda0030000 1                  
init_drive: LBA mode, sectors=12672450rt_memmap: 0x000000000f0000 0x00000000
init_drive: Init device params... ok                        
init_drive: Probing for hdb
print_status: IDE: status=0x0, err=0x0
Mounted ext2fs
Found Linux version 2.4.20-8 ([e-mail]) #1 Thu Mar 1
3 17:18:24 EST 2003 bzImage.
Loading kernel... ok
Jumping to entry point...
Linux version 2.4.20-8 ([e-mail]) (gcc version 3.2.2
 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000de0 - 00000000000a0000 (usable)
 BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
0MB HIGHMEM available.
512MB LOWMEM available.
hm, page 00000000 reserved twice.
On node 0 totalpages: 131072
zone(0): 4096 pages.
zone(1): 126976 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda2 console=tty0 console=ttyS0,115200
Initializing CPU#0
Detected 1995.061 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop...