Hello Gents,
This patch tries to improve the already existing Truxton board support package. The VGA card (Matrox G550e) shipped along with the Truxton board is supported as well as the external superIO controller chip ( SCH5027D ). A dedicated driver for the PCIe portA is included.
See the patch below for more informations.
Thank you,
Arnaud *
** *
This patch adds VGA and PS/2 Keyboard/mouse support to the already existing intel truxton (ep80579) dev board. This patch tries to improve the pcie portA configuration. The Matrox G550e PCIe gfx card shipped along with the dev board is supported.
Patch details:
The LPC interface has SERIRQ enabled (in order to receive legacy IRQ1/12 from the superIO controller. Added SCH5027D support to the generic smscsuperio driver. Modified config.lb to support the external SCH5027D superIO controller. Modified devicetree.cb to reflect actual device tree. Coreboot does not run at 0x4000 anymore but 0x00100000 instead. Use CONFIG_LB_MEM_TOPK to allow coreboot to run 0x00100000. CONFIG_CONSOLE_VGA is enabled. Added an ep80579 pcie_porta module (pciexp_porta_ep80579.c). The ep80579'smm interface is not in control of the VGA legacy memory range anymore. The default payload is seabios from now on.
Signed-off-by: Arnaud Maye arnaud.maye@4dsp.com
Index: src/southbridge/intel/i3100/i3100_early_lpc.c =================================================================== --- src/southbridge/intel/i3100/i3100_early_lpc.c (revision 4605) +++ src/southbridge/intel/i3100/i3100_early_lpc.c (working copy) @@ -25,6 +25,9 @@ /* Enable decoding of I/O locations for SuperIO devices */ pci_write_config16(dev, 0x80, 0x0010); pci_write_config16(dev, 0x82, 0x340f); + + /* Enable the SERIRQs (start pulse width is 8 clock cycles) */ + pci_write_config8(dev, 0x64, 0xD2); }
static void i3100_halt_tco_timer(void) Index: src/superio/smsc/smscsuperio/superio.c =================================================================== --- src/superio/smsc/smscsuperio/superio.c (revision 4605) +++ src/superio/smsc/smscsuperio/superio.c (working copy) @@ -60,6 +60,7 @@ #define DME1737 0x78 #define SCH3112 0x7c #define SCH5307 0x81 /* Rebranded LPC47B397(?) */ +#define SCH5027D 0x89
/* Register defines */ #define DEVICE_ID_REG 0x20 /* Device ID register */ @@ -135,6 +136,7 @@ {DME1737, {0, 3, 4, 5, -1, 7, -1, -1, -1, -1, -1, -1, 10, -1, -1}}, {SCH3112, {0, 3, 4, 5, -1, 7, -1, -1, -1, -1, -1, -1, 10, -1, -1}}, {SCH5307, {0, 3, 4, 5, -1, 7, -1, -1, 8, -1, -1, -1, 10, -1, -1}}, + {SCH5027D, {0, 3, 4, 5, -1, 7, -1, -1, -1, -1, -1, -1, 10, -1, 11}}, };
/** Index: src/mainboard/intel/truxton/Config.lb =================================================================== --- src/mainboard/intel/truxton/Config.lb (revision 4605) +++ src/mainboard/intel/truxton/Config.lb (working copy) @@ -143,6 +143,19 @@ io 0x60 = 0x2f8 irq 0x70 = 3 end + end + chip superio/smsc/smscsuperio + device pnp 2e.0 off end + device pnp 2e.3 off end + device pnp 2e.4 off end + device pnp 2e.5 off end + device pnp 2e.7 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 2e.a off end end end device pci 1f.2 on end # SATA Index: src/mainboard/intel/truxton/devicetree.cb =================================================================== --- src/mainboard/intel/truxton/devicetree.cb (revision 4605) +++ src/mainboard/intel/truxton/devicetree.cb (working copy) @@ -26,6 +26,19 @@ io 0x60 = 0x2f8 irq 0x70 = 3 end + end + chip superio/smsc/smscsuperio + device pnp 2e.0 off end + device pnp 2e.3 off end + device pnp 2e.4 off end + device pnp 2e.5 off end + device pnp 2e.7 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 2e.a off end end end device pci 1f.2 on end # SATA Index: src/mainboard/intel/truxton/Options.lb =================================================================== --- src/mainboard/intel/truxton/Options.lb (revision 4605) +++ src/mainboard/intel/truxton/Options.lb (working copy) @@ -37,6 +37,7 @@ uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses CONFIG_LB_MEM_TOPK uses CONFIG_PAYLOAD_SIZE uses CONFIG_ROMBASE uses CONFIG_XIP_ROM_SIZE @@ -67,6 +68,7 @@ uses HOSTCC uses CONFIG_CROSS_COMPILE uses CONFIG_OBJCOPY +uses CONFIG_CONSOLE_VGA
### @@ -155,9 +157,14 @@ ## ## coreboot C code runs at this location in RAM ## -default CONFIG_RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00100000
## +## in order to have coreboot running at 0x100000, TOPK has to be set +## +default CONFIG_LB_MEM_TOPK = 2*1024*1024 + +## ## Load the payload from the ROM ## default CONFIG_ROM_PAYLOAD=1 @@ -202,6 +209,9 @@ # This defaults to 8 data bits, 1 stop bit, and no parity default CONFIG_TTYS0_LCS=0x3
+# Enable the VGA console. +default CONFIG_CONSOLE_VGA=1 + ## ### Select the coreboot loglevel ## Index: src/northbridge/intel/i3100/pciexp_porta_ep80579.c =================================================================== --- src/northbridge/intel/i3100/pciexp_porta_ep80579.c (revision 0) +++ src/northbridge/intel/i3100/pciexp_porta_ep80579.c (revision 0) @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 4DSP Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +/* This code is based on src/northbridge/intel/i3100/pciexp_porta.c */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <device/pciexp.h> +#include <arch/io.h> +#include "chip.h" +#include <part/hard_reset.h> + +typedef struct northbridge_intel_i3100_config config_t; + +static void pcie_init(struct device *dev) +{ + config_t *config; + u16 val; + + /* Get the chip configuration */ + config = dev->chip_info; + + if(config->intrline) { + pci_write_config32(dev, 0x3c, config->intrline); + } + + printk_spew("configure PCIe port as "Slot Implemented"\n"); + val = pci_read_config16(dev, 0x66); + val &= ~(1<<8); + val |= 1<<8; + pci_write_config16(dev, 0x66, val); + + /* Todo configure the PCIe bootstrap mode (covered by Intel NDA) */ +} + + +static void pcie_bus_enable_resources(struct device *dev) +{ + u8 val8; + if (dev->link[0].bridge_ctrl & PCI_BRIDGE_CTL_VGA) { + printk_spew("Enable VGA IO/MEM forwarding on PCIe port\n"); + pci_write_config8(dev, PCI_BRIDGE_CONTROL, 8); + + dev->command |= PCI_COMMAND_IO; + dev->command |= PCI_COMMAND_MEMORY; + } + pci_dev_enable_resources(dev); + enable_childrens_resources(dev); +} + + +static unsigned int pcie_scan_bridge(struct device *dev, unsigned int max) +{ + u16 val; + u16 ctl; + int flag = 0; + do { + val = pci_read_config16(dev, 0x76); + printk_debug("pcie porta 0x76: %02x\n", val); + if ((val & (1<<11)) && (!flag)) { /* training error */ + ctl = pci_read_config16(dev, 0x74); + pci_write_config16(dev, 0x74, (ctl | (1<<5))); + val = pci_read_config16(dev, 0x76); + printk_debug("pcie porta reset 0x76: %02x\n", val); + flag=1; + hard_reset(); + } + } while (val & (3<<10)); + return pciexp_scan_bridge(dev, max); +} + +static struct device_operations pcie_ops = { + .read_resources = pci_bus_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pcie_bus_enable_resources, + .init = pcie_init, + .scan_bus = pcie_scan_bridge, + .reset_bus = pci_bus_reset, + .ops_pci = 0, +}; + +static struct pci_driver pci_driver_0 __pci_driver = { + .ops = &pcie_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_EP80579_PCIE_PA0, +}; + +static struct pci_driver pci_driver_1 __pci_driver = { + .ops = &pcie_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_EP80579_PCIE_PA1, +}; Index: src/northbridge/intel/i3100/Config.lb =================================================================== --- src/northbridge/intel/i3100/Config.lb (revision 4605) +++ src/northbridge/intel/i3100/Config.lb (working copy) @@ -23,5 +23,6 @@
driver northbridge.o driver pciexp_porta.o +driver pciexp_porta_ep80579.o
default CONFIG_HAVE_HIGH_TABLES=1 Index: src/northbridge/intel/i3100/raminit_ep80579.c =================================================================== --- src/northbridge/intel/i3100/raminit_ep80579.c (revision 4605) +++ src/northbridge/intel/i3100/raminit_ep80579.c (working copy) @@ -31,7 +31,7 @@ { static const u32 register_values[] = { PCI_ADDR(0, 0x00, 0, CKDIS), 0xffff0000, 0x0000ffff, - PCI_ADDR(0, 0x00, 0, DEVPRES), 0x00000000, 0x07420801 | DEVPRES_CONFIG, + PCI_ADDR(0, 0x00, 0, DEVPRES), 0x00000000, 0x07420001 | DEVPRES_CONFIG, PCI_ADDR(0, 0x00, 0, PAM-1), 0xcccccc7f, 0x33333000, PCI_ADDR(0, 0x00, 0, PAM+3), 0xcccccccc, 0x33333333, PCI_ADDR(0, 0x00, 0, DEVPRES1), 0xffffffff, 0x0040003a, Index: targets/intel/truxton/Config.lb =================================================================== --- targets/intel/truxton/Config.lb (revision 4605) +++ targets/intel/truxton/Config.lb (working copy) @@ -34,7 +34,7 @@
romimage "fallback" option CONFIG_USE_FALLBACK_IMAGE=1 - payload /tmp/filo.elf + payload /tmp/seabios.elf end
buildrom ./coreboot.rom CONFIG_ROM_SIZE "fallback"