run getpir under the standard bios and see what you get.
I just happen to have that right here: /* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */
#include <arch/pirq_routing.h>
const struct irq_routing_table intel_irq_routing_table = { PIRQ_SIGNATURE, /* u32 signature */ PIRQ_VERSION, /* u16 version */ 32+16*5, /* there can be total 5 devices on the bus */ 0, /* Where the interrupt router lies (bus) */ 0, /* Where the interrupt router lies (dev) */ 0x1c20, /* IRQs devoted exclusively to PCI usage */ 0, /* Vendor */ 0, /* Device */ 0, /* Crap (miniport) */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ 0x58, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { {0,0xa0, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x1, 0}, {0,0x98, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x2, 0}, {0,0x50, {{0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}}, 0x3, 0}, {0,0x68, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0}, {0,0x8, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0, 0}, } };