Hi I have littel trouble with this mainboard. First: Is this normal?
<shnip> Capability: 0x10 @ 0x80 PCI: 00:01.0 [1106/8601] enabled PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: 00:11.0 [1106/8231] bus ops PCI: 00:11.0 [1106/8231] enabled PCI: 00:11.1 [1106/0571] ops PCI: 00:11.1 [1106/0571] enabled PCI: 00:11.2 [1106/3038] disabled PCI: 00:11.3 [1106/3038] disabled PCI: 00:11.4 [1106/8235] ops <snap>
I'm worry about the bad id.
Second: I used etherboot as payload, but it didn't came up. The last output from the serial communcation:
<shnip> LinuxBIOS-2.0.0.0Fallback Sun May 27 20:19:19 UTC 2007 starting... 87 is the comm register SMBus controller enabled vt8601 init starting 00000000 is the north 1106 0601 0120d4 is the computed timing NOP PRECHARGE DUMMY READS CBR MRS NORMAL set ref. rate enable multi-page open Slot 00 is SDRAM <snap>
On screen runs a defect ascii-output throu
Markus