You might want to consider the ECS K7S5A--It uses a SiS735 chipset. It is also compatible with both DDR SDRAM and normal SDRAM, but I am not sure if anybody has tried this using DDR SDRAM on the SiS73x series boards with LinuxBIOS yet.
On Fri, 13 Feb 2004, Andre Dias wrote:
Hello Fellows,
I have been using linuxbios for a while on some products of my company, we make pc-based jukeboxes and arcade machines for pubs and public venues and I have been using linuxbios and DOC to make a fast boot and prevent the computer to hang at boot when CMOS clears, and to store some information on DOC and prevent hard disk corruption problems. We also have busybox on DOC, so we can verify problems and provide maintenance even when HD fails.
We used pcchips M810 (red motherboard) and ECS K7SEM (purple). We used this board mainly because it was the cheapest and worked fine with linuxbios. Now this motherboards are impossible to find on retailers and SDRAM modules are becoming scarce. I have seen that EPIA is being actively developed but EPIA is not really easy to find and cheap (at least in south america), also its CPU is not the best performance.
I was thinking of using PCCHIPS m810D (SIS 740, closer to SIS730) but its PLCC BIOS is soldered onboard! So I had to switch to ASROCK K7VM2 (via KM266), and we could afford donnate $400 and this motherboard plus cpu and memory, to a developer that could make linuxbios work on this board (with sound, eth0, framebuffer, IDE and serial port working). Its a very small reward, but maybe it will help any developer that is already working on it.
thanks for the attention
Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios