Maybe this would help :
https://blog.hqcodeshop.fi/archives/276-Improving-Nuvoton-NCT6776-lm_sensors...
________________________________ From: Аладышев Константин aladyshev@nicevt.ru Sent: Monday, January 23, 2017 4:14:18 PM To: 'Pierre P'; 'coreboot' Subject: Re: [coreboot] PECI temperature in lm-sensors
I'm sure that I have only one chip, I just don't know how to enable PECI monitoring in it...
From: Pierre P [mailto:ppz@outlook.fr] Sent: Monday, January 23, 2017 6:10 PM To: Аладышев Константин; coreboot Subject: Re: [coreboot] PECI temperature in lm-sensors
In my case sensors-detect found one SuperIO the first time I ran it, but there was a second one "hidden" in a i2c chip, each one provide different information. In the end I had two kernel modules loaded instead of only one previously.
Pierre
________________________________ From: Аладышев Константин <aladyshev@nicevt.rumailto:aladyshev@nicevt.ru> Sent: Monday, January 23, 2017 4:01 PM To: 'Pierre P' Subject: Re: [coreboot] PECI temperature in lm-sensors
Hi!
No, "sensors-detect" founds my SuperIO and needed kernel module is installed in system correctly.
The problem is in "sensors" command. It displays all voltages and pch temperatures correctly, except of PECI temperature from CPU, PECI agent temp is always zero.
From: Pierre P [mailto:ppz@outlook.fr] Sent: Monday, January 23, 2017 5:40 PM To: Аладышев Константин Subject: Re: [coreboot] PECI temperature in lm-sensors
Hi,
Had a similar issue on a KCMA-D8. When running sensors-detect you have to force probing of i2c chips (default choice is "NO" if you just press enter when asked) then hopefully with one of them it will detect other sensors.
Hope this helps
Pierre
________________________________
From: coreboot <coreboot-bounces@coreboot.orgmailto:coreboot-bounces@coreboot.org> on behalf of Аладышев Константин <aladyshev@nicevt.rumailto:aladyshev@nicevt.ru> Sent: Monday, January 23, 2017 3:17 PM To: coreboot@coreboot.orgmailto:coreboot@coreboot.org Subject: [coreboot] PECI temperature in lm-sensors
Does someone have any experience with enabling PECI monitoring on nuvoton SuperIOs ?
I'm trying to enable it on board with Haswell+Lynxpoint CPU and NCT6776 SuperIO.
But all I see in lm-sensors output for now is zero temperature for PECI Agent.
Does coreboot have any SuperIO chips/Intel CPUs/motherboards, that have this functional enabled? What is usually need to be done to enable PECI monitoring?
-- coreboot mailing list: coreboot@coreboot.orgmailto:coreboot@coreboot.org https://www.coreboot.org/mailman/listinfo/coreboot