On Tue, Nov 04, 2008 at 01:17:52PM -0800, ron minnich wrote:
On Tue, Nov 4, 2008 at 12:36 PM, Jordan Crouse jordan.crouse@amd.com wrote:
On 04/11/08 20:47 +0200, Roman Yeryomin wrote:
On Tue, Nov 4, 2008 at 8:43 PM, Marc Jones Marc.Jones@amd.com wrote:
Roman Yeryomin wrote:
I'm experimenting with coreboot (v3) on alix2c3 and still can't get serial console working. :( It stops right after kernel is done booting (I can see coreboot, filo and kernel messages just fine). I
Is it just the console that stops? The kernel is still running and otherwise behaving normally?
exactly! only console is not working... system is running fine (at least for few hours for sure)
pass CONSOLE=/dev/ttyS0 on the command line.
does CONSOLE have some special meaning to busybox?
Ward, how is your 2c3 nowadays? COuld Roman send you an image and you see if it boots?
I've got two 2c3's in production, with coreboot. I could probably test on one (my home firewall), but it's a bit annoying because it takes down my network :) This week's hard though, I'm technically on vacation... But I'm interested in helping out for sure.
Thanks, Ward.