Am Dienstag, den 17.12.2013, 09:03 +0100 schrieb Rudolf Marek:
With the working image I could hang the system with `cbmem -c`, which should reported no table found. After rebooting it hung after ten minutes it hung again. This time I do not know why and how to reproduce it.
I think the hang right after `cbmem -c` was a coincidence.
Lastly I think there were some graphical corruption on the external card not present with the vendor BIOS.
Do you use more than 2GB ram? I think I never tested board with a lot of RAM (too expensive for me ;) I think it could be sign that there is some problem with top of memory settings in the chipset (the chipset is using it for DMA routing boundary I think, this could be wrong if you use it with lot of memory)
I am using two 1 GB memory modules, so I am not using more than 2 GB RAM.
We may need to fix it.
No idea, if the hangs are related to the RAM configuration.
I’ll attach my used .config which seems to work besides the hangs. I’ll try to find the broken config with the IO issues later.
Thanks,
Paul