26 Nov
2013
26 Nov
'13
2:45 a.m.
On 11/25/2013 04:20 PM, Dave Frodin wrote:
I wouldn't think it would be a bad board if the AMI bios works.
When you enabled "Add a VGA BIOS image" and changed the default graphics ID for your VBIOS did you change it from 1002,9830 to 1002,9834?
On Mon, Nov 25, 2013 at 4:35 PM, Prop 395 <prop395@gmail.com mailto:prop395@gmail.com> wrote:
I tried the .config file and adjusted the VBIOS for my dev system, but I am still getting the same results (no video). The sticker on the motherboard near the power connector says IMB-A180E-H E. Printed on the right edge of the motherboard near the heat sink it says IMB-A180-H REV. G/A 1.02. I also tried the stock AMI BIOS to confirm it still works (and it did). Do I just have a bad board? -- coreboot mailing list: coreboot@coreboot.org <mailto:coreboot@coreboot.org> http://www.coreboot.org/mailman/listinfo/coreboot
I saw in your .config the device ID was already set to 9834 and cbfstool print confirms it.