Steffen D. wrote:
Dear Mailinglist,
im trying to build a bios for GeodeLX cpu. I have a development board from LogicPC. Afaik this is the same board that was used for the development for OLCP. I try it with the svn version Linuxbios-3. I have made a image with make menuconfig and configured everything cleary for the geodelx board. I flash the rom with windows and a galep 5 flash device. Im very sure that the flashing works because i can clone the bios which comes with the board.
I dont get any output over rs232.
Im using SST 49LF004B roms with 4mbit. Maybe here is the problem? I have made linuxbios.rom with a target size of 2mb. I also tryed "cat linuxbios.rom linuxbios.rom > linuxbios4m.rom". I found this hin here in the ml.
Every help is welcome!
Regards,
Steffen
Steffen, Use linuxBIOS v2 and buildrom to build GeodeLX platforms. Start with the amd/norwich or amd/db800 mainboards.
Marc