Have a look at src/northbridge/via/vt8601/raminit.c, this board is pretty screwy.
On Sun, 2007-05-27 at 21:14 +0200, Markus Boas wrote:
<shnip> LinuxBIOS-2.0.0.0Fallback Sun May 27 20:19:19 UTC 2007 starting... 87 is the comm register SMBus controller enabled vt8601 init starting 00000000 is the north 1106 0601
Odd, this should be 1106 8601...
0120d4 is the computed timing
Right here's one problem, this should be 0x1d0. Looking at raminit.c, this appears to not be used at all, but it still is somewhat concerning
NOPPRECHARGE DUMMY READS CBR MRS NORMAL set ref. rate enable multi-page open
There should be some output from setting the MA map type here. Not sure why there isn't, but it's odd to say the least.
Slot 00 is SDRAM
<snap>
On screen runs a defect ascii-output throu
Markus
And there's absolutely nothing beyond this? Oh, and the other question: are you using dual-sided dimms? From what I can see, that's what the code's assuming at the moment.
-Corey