Hi _______________________________________________ (hmmm, I don't think this is your name),
On Tue, Nov 2, 2021 at 11:19 AM bernd1-1@web.de bernd1-1@web.de wrote:
Hi. I follow these instructions:
https://doc.coreboot.org/tutorial/part1.html
I'm on Step 5 - Configure the build > Check your configuration (optional step):
I did
$ make savedefconfig $ cat defconfig
The instructions say:
"There should only be two lines (or 3 if you’re using the system toolchain):
CONFIG_PAYLOAD_ELF=y CONFIG_PAYLOAD_FILE="payloads/coreinfo/build/coreinfo.elf""
I'm not using the system toolchain. There are the following 9 lines (instead of only two):
CONFIG_CBFS_SIZE=0x00040000 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_UART_PCI_ADDR=0x0 CONFIG_SUBSYSTEM_VENDOR_ID=0x0000 CONFIG_SUBSYSTEM_DEVICE_ID=0x0000 CONFIG_CONSOLE_QEMU_DEBUGCON_PORT=0x402 CONFIG_POST_IO_PORT=0x80 CONFIG_PAYLOAD_ELF=y CONFIG_PAYLOAD_FILE="payloads/coreinfo/build/coreinfo.elf"
Why do I get 9 lines (instead of only two) and is that a problem or could I go on with the instructions?
Extra lines appear in defconfigs because of a recent regression, if I recall correctly. In any case, your config looks correct, you can go on with the instructions.
Regards,_______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org
Best regards, Angel