Re: EPIA PCI slot

"Brian G. Rhodes"  writes:
> The reason I was not getting interrupts on devices in the pci slot on the
> EPIA is because they were not set to be bus masters, so they would never
> generate interrupts.  A quick write to the command register fixed the
> problem.  Command register is being set to 0x02.  It should be set to
> 0x06.  a 6 to 4.

Actually this is an interesting symptom.  Being a Bus Master means you
can initiate transactions on the PCI bus i.e. DMA.  There is no requirement
that I know of that the bus master bit applies to IRQ's.  Those are out
of band signals.

Eric