Hi, Here is the output of what I tried: ======================================================
platform get console Rear Panel Platform COMA localhost # platform set console -d Error. Invalid parameter(s). localhost # platform set console --disable Error. Invalid parameter(s). localhost # platform set console --help platform set console {--serial|-s} sp [{{--enable|-e}|{--disable|-d}}] [{{--prune|-p}|{--noprune|-n}}] [{--speed|-S} {1200|2400|4800|9600|19200|38400|57600|115200}] [{--log|-l} size] [{-h|--help}] or platform set console {--serial|-s} platform [{-h|--help}] {-S|--speed} {1200|2400|4800|9600|19200|38400|57600|115200} Select the port speed on the SP to use to connect to the platform console. BIOS, the platform OS and the SP must all be configured for the same speed. This setting does not affect the platform configuration Cannot be used with: -s=platform {-d|--disable} Indicate that the platform console monitor is inactive Cannot be used with: -e -s=platform {-e|--enable} Indicate that the platform console monitor is active Cannot be used with: -d -s=platform {-h|--help} Print the usage message. {-l|--log} size Select the trigger size in KB for console log rotation. Minimum 64KB, Maximum 1024KB Cannot be used with: -s=platform {-n|--noprune} Indicate that the platform console log should be the raw console data Cannot be used with: -p -s=platform {-p|--prune} Indicate that the platform console log is to be cleaned of ANSI sequences and pruned of duplicated information Cannot be used with: -n -s=platform {-s|--serial} {sp|platform} Specify whether the serial port is connected to the platform COMA port, or the SP serial console Cannot be used with: -e [platform] -d [platform] -p [platform] -n [platform] -S [platform] -l [platform]
localhost # ======================================================
On 7/19/06, Stefan Reinauer stepan@coresystems.de wrote:
- Anil B G bg.anil@gmail.com [060719 18:02]:
Hi, I have captured the output of serial (COM A), that comes from the SP. However, I am unable to disable the same and get the output of LinuxBIOS
on the
serial
try "platform get console" ... it seems you mistyped the name several times. the sp does not like backspace, so it prints the error you see.
===============================================================================
========
Starting OpenBSD Secure Shell server: sshd.
localhost login: root Password: localhost # platform get consi ole Error. The requested service is not available. localhost # platform platform: Error. Unknown subcommand. Usage: platform console {-h|--help} platform get console {-h|--help} platform get hostname {-h|--help} platform get mac {-h|--help} platform get power state {-h|--help} platform get product-id {-h|--help} platform get os state {-h|--help} platform set console {-h|--help} platform set os state boot {-h|--help} platform set os state reboot {-h|--help} platform set os state shutdown {-h|--help} platform set os state update-bios {-h|--help} platform set power state {-h|--help} localhost # platform get consil ole Rear Panel Platform COMA localhost # platform set console -d Error. Invalid parameter(s). localhost # platform set consi ole -help platform set console {--serial|-s} sp [{{--enable|-e}|{--disable|-d}}] [{{--prune|-p}|{--noprune|-n}}] [{--speed|-S} {1200|2400|4800|9600|19200|38400|57600|115200}] [{--log|-l}
size]
[{-h|--help}]or platform set console {--serial|-s} platform [{-h|--help}] {-S|--speed} {1200|2400|4800|9600|19200|38400|57600|115200} Select the port speed on the SP to use to connect to
the
platform console. BIOS, the platform OS and the SPmust
all be configured for the same speed. This setting does
not
affect the platform configuration Cannot be used with: -s=platform{-d|--disable} Indicate that the platform console monitor is
inactive
Cannot be used with: -e -s=platform{-e|--enable} Indicate that the platform console monitor is active Cannot be used with: -d -s=platform {-h|--help} Print the usage message. {-l|--log} size Select the trigger size in KB for console log
rotation.
Minimum 64KB, Maximum 1024KB Cannot be used with: -s=platform{-n|--noprune} Indicate that the platform console log should be the
raw
console data Cannot be used with: -p -s=platform{-p|--prune} Indicate that the platform console log is to be
cleaned of
ANSI sequences and pruned of duplicated information Cannot be used with: -n -s=platform{-s|--serial} {sp|platform} Specify whether the serial port is connected to the platform COMA port, or the SP serial console Cannot be used with: -e [platform] -d [platform] -p [platform] -n [platform] -S [platform] -l [platform]
localhost #
===============================================================================
=========
On 7/19/06, Stefan Reinauer stepan@coresystems.de wrote:
what does "platform get console" tell you? It should say something like: $ platform get console Rear Panel Enabled Speed Pruning Log Trigger SP Console Yes 19200 No 244 KB ^^^^^^^^^^^^^^^^^^ You need to configure the console on the SP with the "platform set console" command. platform set console {--serial|-s} sp[{{--enable|-e}|{--disable|-d}}]
[{{--prune|-p}|{--noprune|-n}}] [{--speed|-S}{1200|2400|4800|9600|19200|38400|57600|115200}]
[{--log|-l} size] [{-h|--help}] or platform set console {--serial|-s} platform [{-h|--help}] {-S|--speed} {1200|2400|4800|9600|19200|38400|57600|115200} Select the port speed for the platform console. BIOS, the platform OS and the console must all be configured for the same speed Cannot be used with: -s=platform {-d|--disable} Indicate that the platform console monitor is inactive Cannot be used with: -e -s=platform {-e|--enable} Indicate that the platform console monitor isactive
Cannot be used with: -d -s=platform {-p|--prune} Indicate that the platform console log is to be cleaned of ANSI sequences and pruned of duplicated information Cannot be used with: -n -s=platform {-s|--serial} {sp|platform} Specify whether the serial port is connected tothe
platform COMA port, or the SP serial console Cannot be used with: -e [platform] -d [platform]-p
[platform] -n [platform] -S [platform] -l[platform]
* Anil B G <bg.anil@gmail.com> [060718 19:14]: > Hi Stefan, > I logged into the SP and tried platform console etc. but I wasnot
really > sure how that would help me. > That would only change the settings of the Linux thats loaded andon a
reboot > the PPCboot would again spew messages on the serial. > I guess I am missing something here, but cannot really visualisehow to
get the > output of LinuxBIOS on the serial. > One way perhaps would be to disable the SP at the hardware level(if that
is > possible). > > Please let me know if it is possible to disable serial by trying "platform > console" on the SP. > > Regards > Anil > > > On 7/17/06, Stefan Reinauer <stepan@coresystems.de> wrote: > > * Anil B G < bg.anil@gmail.com> [060717 17:07]: > > Hi, > > I only get the output of the SP on the serial interface. > > log in to the sp and do "platform console" > > > -- > coresystems GmbH Brahmsstr. 16 D-79104 Freiburg i. Br. > Tel.: +49 761 7668825 Fax: +49 761 7664613 > Email: info@coresystems.de http://www.coresystems.de/ > > -- coresystems GmbH Brahmsstr. 16 D-79104 Freiburg i. Br. Tel.: +49 761 7668825 Fax: +49 761 7664613 Email: info@coresystems.de http://www.coresystems.de/-- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info@coresystems.de • http://www.coresystems.de/