Re: Build error on the EPIA-M

[Adam Sulmicki]

On Sun, 27 Feb 2005, Adam Talbot wrote:
> On the EPIA-MII the CF is part of the PCMCIA and does not connect to the ide
> bus at any time... So the only way I can get access to the CF is through
> ide-cs. I do have an adaptor on order (CD-IDE) to help with this issue, but
> I would much rather use the onboard CF.  The less cables the smaller the
> case.

ouh, that's nasty.

yes, via pmcia it is still an ide device..

i guess you can do it either way
    a) pcmcia/ide support in kernel and use that (big!) kernel to
    boot from that device
    b) use ide<cf> adapater and smaller kernel with ide support only.