Re: [LinuxBIOS] Etherboot (FILO) with SATA on tyan s2895

[Lu, Yinghai]

No FILO need...

Use mkelfImage to put tiny kernel and initrd to make one elf. And
LinuxBIOS can treat that as one payload and just like FILO and
Etherboot.

Someone (from F5) has used 2M flash ROM to put LinuxBIOS+kernel+initrd.
You could do that if you want to spare the CF IDE flash.

With the tiny kernel support, we can have support for all driver support
in kernel for SCSI, USB, Firewire, iSCSI, AOE, IB, Myrinet,
quadric...any media.

We don't need to port the driver to the boot loader. And everyone could
focus on driver in kernel instead of waste time to port driver back and
forth.

That is correct way.

Just like we are talking about UEFI support. We could add the table and
services in LinuxBIOS, but we like to run uefi as linux application on
kernel to re use the driver in kernel.

We don't need to spend dev time on FILO and Etherboot anymore.

YH

-----Original Message-----
From: Myles Watson [mailto:[e-mail]] 
Sent: Thursday, May 18, 2006 6:49 AM
To: Lu, Yinghai; [e-mail]
Subject: RE: [LinuxBIOS] Etherboot (FILO) with SATA on tyan s2895

It's starting to seem like a long chain of events from LinuxBIOS to
Etherboot to FILO to kernel on CF to myKernel.  I'd also like to be able
to
get to grub eventually.  Is there a way to go from LinuxBIOS to grub
more
directly on the s2895?

Thanks again for your help.

Myles

-----Original Message-----
From: Lu, Yinghai [mailto:[e-mail]] 
Sent: Wednesday, May 17, 2006 5:09 PM
To: [e-mail]; [e-mail]
Subject: RE: [LinuxBIOS] Etherboot (FILO) with SATA on tyan s2895

You can not boot from CK804 sata directly with FILO in Etherboot.

The code only support Sata that can work on compatible IDE mode.

You need to use other media ( network, CF IDE flash) to load kernel with
ck804 sata and kexec support, and use kexec to load final kernel in your
sata disk.

YH

-----Original Message-----
From: [e-mail]
[mailto:[e-mail]] On Behalf Of Myles Watson
Sent: Wednesday, May 17, 2006 3:57 PM
To: [e-mail]
Subject: [LinuxBIOS] Etherboot (FILO) with SATA on tyan s2895

I am booting linuxbios with etherboot and filo as the payload. I tried
to
follow the s2881 tutorial on the wiki.

Etherboot only finds my cd-rom. When I try to use hde:/ it tells me that
"Drive 4 does not exist". All drives up to j except hda (my cd-rom) give
the
same error message. Sometimes if I try hdg it hangs.

I saw README.filo_in_etherboot where it says it only works on SATA port
1 or
2. I've tried on SATA 0 port 0 and 1, SATA 1 port 2 and 3.

I also seem to need to boot the factory BIOS in between each attempt, or
I
won't get very far.

Is there something simple I've missed?

Thanks,
Myles

Output:

Etherboot 5.4.2
Drivers: TG3 FILO Images: NBI ELF
Protocols: DHCP TFTP
Relocating text ...
Scanning PCI: found 30 devices
Probing pci disk...
[FILO]FILO version 0.4.1
boot: hde3:/boot/vmlinuz... initrd=/boot/initrd...
IDE time out
No drive detected on IDE channel 2
boot: hdc:/ 
No drive detected on IDE channel 1