RE: [LinuxBIOS] Asking help for serial output

[Frank Samuel]

Here is the info:

when running flash_rom -vw linuxbios.rom, I get
.....
Part is SST49LF004A/B
Programming Page: 0007 at address: 0x00070000
Verifying address: VERIFIED

Memory of the machine with linuxbios installed is of
size 1GB.

I tired compiling on two machines with two different
kernels. 
2.6.11.4-20a-default (SuSE 9.3 on a uniprocessor
desktop)  
2.4.22-1.2115.nptlsmp (Fedora Core 1 on IWILL DK8S.)
Both kernels are 32-bit.

The machine that I install linuxbios has a kernel of 
64 bit 2.6.5-7.97-smp #1 SMP (SuSE SLES9)

Xuehua

--- "Lu, Yinghai"  wrote:
> Flash_rom?
>
> Did you try 
> flash_rom -vw linuxbios.rom
>
> How many memory on MB? >4G or not?
> Linux Kernel version? 2.6, 64 bit?
>
> YH
>
> -----Original Message-----
> From: [e-mail]
> [mailto:[e-mail]] On Behalf Of
> Stefan Reinauer
> Sent: Wednesday, September 21, 2005 2:38 PM
> To: Frank Samuel
> Cc: [e-mail]
> Subject: Re: [LinuxBIOS] Asking help for serial
> output
> Frank Samuel  [050921
>
> 23:24]:
> > I tried two motherboards, Iwill/DK8S2 and
>
> tyan/s2882.
> > Compiled succesfully and get a linuxbios.rom and
> > flashed them to chip using flash_rom. But I didn't
>
> see
> > any output via serial port.
>
> wrong baud rate? See the motherboard config file
>
> 1:1 cable instead of null modem (cross) cable?
>
> Stefan

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com