Hello; I am trying to run coreboot on F2A85-M motherboard (without VGA support enabled). The CPU used is AMD Trinity A8-5600K, RAM is Kingston HyperX PnP 4GB (2x2GB) DDR3 1866 (http://www.kingston.com/datasheets/KHX1866C11D3P1K2_4G.pdf).
I cloned the coreboot repository and ran 'make menuconfig'. The only options I set were motherboard vendor and type (RAM voltage is the default value of 1.5V). The desired payload is the default SeaBIOS. I have no interest in enabling VGA, thus I did not try to enable it. I used flashrom to flash the image. When I try to boot, execution fails with the following message (full log in the attachment):
Enabling resources...
Fam15 - domain_enable_resources: AmdInitMid. agesawrapper_amdinitmid Unexpected Exception: 0 @ 10:0022fabf - Halting Code: 0 eflags: 00010046 eax: 0002e630 ebx: 0000014d ecx: 00000002 edx: 00000000 edi: 100123e3 esi: 00000000 ebp: 10000660 esp: 002bcd60
The number on my PCI POST card is "0x1".
Unfortunately I have no other RAM modules to try. I tried to change the position from blue slots to black slots but then I got:
coreboot-4.0-5584-ge92155f-dirty Sat Mar 1 21:05:40 CET 2014 starting... BSP Family_Model: 00610f01 cpu_init_detectedx = 00000000 agesawrapper_amdinitreset Fch OEM config in INIT RESET Done Got past agesawrapper_amdinitearly ASSERTION FAILED: file 'src/vendorcode/amd/agesa/f15tn/Proc/Mem/Main/mmExcludeDimm.c', line 236
The command 'make crossgcc' also seems not to help at all.
I will appreciate any ideas.
Regards; Rostislav Lisovy