On Mon, Dec 17, 2007 at 03:55:06AM +0100, Peter Stuge wrote:
On Sat, Dec 15, 2007 at 03:21:28PM -0600, Jason Green wrote:
I am new to LinuxBIOS mailing list. I have a few old boards I want to try out. I dunno if it's compatible with this or not.
Maybe it's similar enough to the s1846 that the 1846 port works as is? Or maybe it could at least be a good start for a s1894 port?
Yep, definately. Shouldn't be too much hassle to port this board.
Jason, please post the output of 'lspci -tvnn' and 'superiotool -dV' here (run as root). Also, post the irq_tables.c file which is generated when you run 'getpir' on the board.
With that information as a starting point we'll be able to make a first patch for your board.
Do you have a possibility to flash your BIOS chip (either an external programmer or you can use the flashrom tool (please post 'flashrom -V' here so we know if your board might be supported).
Also, is the BIOS chip in a socket or soldered onto the board? Do you have a null-modem cable to grab serial debugging output from LinuxBIOS later?
Thanks, Uwe.