Re: [coreboot] Gigabyte M57SLI - 4MB Chip - LAB doesn't boot like expected (was: LZMA Error)

[Harald Gutmann]

Am Freitag, 23. Mai 2008 20:23:11 schrieb Carl-Daniel Hailfinger:
> Try this:
> Report actual and wanted LZMA decompression scratchpad size:
> Signed-off-by: Carl-Daniel Hailfinger

The patch worked, i had to set the decoder scratchpad size to 50335340, which 
seems quite much to me, but there was no more error on "Uncompressing to 
RAM".

Acked-by: Harald Gutmann 
To add that also into the coreboot v2 reprository, and not just in v3.

But booting with LAB didn't work, the last lines which i get for now are:
"rom_stream: 0xffc00000 - 0xfffe7fff
Uncompressing to RAM 0x0100000"

Maybe, as i set the scratchpad size that high, it takes really long to 
decompress the image to the RAM. I waited about 2 minutes and nothing more 
happened, i think that should be enaugh time to decompress 4MB into the RAM.

Any idea what is wrong with my image, or what could be done to get debug 
informations?
> Index: LinuxBIOSv2-stuff/src/lib/lzma.c
>
> --- LinuxBIOSv2-stuff/src/lib/lzma.c	(Revision 3348)
> +++ LinuxBIOSv2-stuff/src/lib/lzma.c	(Arbeitskopie)
> @@ -12,6 +12,7 @@
>
> #include "lzmadecode.c"
>
> +#define LZMA_SCRATCHPAD_SIZE 15980
>
> static unsigned long ulzma(unsigned char * src, unsigned char * dst)
>  {
> @@ -22,7 +23,7 @@
>    int res;
>    CLzmaDecoderState state;
>    SizeT mallocneeds;
> unsigned char scratchpad[15980];
>
> unsigned char scratchpad[LZMA_SCRATCHPAD_SIZE];
>
> memcpy(properties, src, LZMA_PROPERTIES_SIZE);
> outSize = *(UInt32 *)(src + LZMA_PROPERTIES_SIZE);
>
> @@ -30,8 +31,9 @@
>    	printk_warning("Incorrect stream properties\n");
>    }
>    mallocneeds = (LzmaGetNumProbs(&state.Properties) * sizeof(CProb));
> if (mallocneeds > 15980) {
> printk_warning("Decoder scratchpad too small!\n");
> if (mallocneeds > LZMA_SCRATCHPAD_SIZE) {
> printk_warning("Decoder scratchpad too small, have %i, need %i!\n",
> 		LZMA_SCRATCHPAD_SIZE, mallocneeds);
> }
> state.Probs = (CProb *)scratchpad;
> res = LzmaDecode(&state, src + LZMA_PROPERTIES_SIZE + 8,
>
> (SizeT)0xffffffff, &inProcessed,