As the subject states, whenever I run inteltool -a under root, I do not get any outputs. My dump is listed below. I am running a kaby lake 7820hq for reference. Any help would be appreciated. Is kaby lake not supported for coreboot? Best, ~Justin
CPU: ID 0x906e9, Processor Type 0x0, Family 0x6, Model 0x9e, Stepping 0x9 Northbridge: 8086:5910 (unknown) Southbridge: 8086:a154 (CM238) IGD: 8086:591b (Intel(R) UHD Graphics 630) Error: Dumping GPIOs on this southbridge is not (yet) supported.
============= RCBA ==============
Error: Dumping RCBA on this southbridge is not (yet) supported.
========== PMBASE/ABASE =========
Error: Dumping PMBASE on this southbridge is not (yet) supported.
============= MCHBAR ============
Error: Dumping MCHBAR on this northbridge is not (yet) supported.
============= EPBAR =============
Error: Dumping EPBAR on this northbridge is not (yet) supported.
============= DMIBAR ============
Error: Dumping DMIBAR on this northbridge is not (yet) supported.
========= PCIEXBAR ========
Error: Dumping PCIEXBAR on this northbridge is not (yet) supported.
Error: Dumping MSRs on this CPU (0x0906e0) is not (yet) supported.
============= AMBs ============
Error: Dumping AMBs on this MCH is not (yet) supported.
============= SPI / BIOS CNTL =============
Error: Dumping SPI on this southbridge is not (yet) supported.
============= AHCI Registers ==============
ABAR = 0xdf32b000 (MEM)