On Mon, Apr 23, 2007 at 09:11:40PM +0200, Stefan Reinauer wrote:
Did you ever set the options to reasonable values? linuxbios does not to this by itself. 8)
I see :) So that's what I did wrong. How many of these values are actually used by linuxbios? For instance, I had baud_rate set to 1200 and dual_core was off; yet the system booted just fine with 115200 baud on serial, and I could see both cores on this dual-core cpu board.
I can't really seem to find any documentation about all the settings that are possible with lxbios; most seem straightforward enough, but is there something out there that describes each field?
Thanks, Ward.
boot_option = Fallback last_boot = Fallback ECC_memory = Disable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 100Mhz dual_core = Enable power_on_after_fail = Enable debug_level = Spew boot_first = HDD boot_second = Network boot_third = Floppy boot_index = 0xe boot_countdown = 0xfa slow_cpu = off nmi = Enable iommu = Enable