On Fri, 07 Jun 2013 22:14:42 +0200 Tim Zander t.zander@uea.ac.uk wrote:
Dear Corebooters,
I flashed my x60s as described in the wiki. I had the same output as similar result as in here http://www.flashrom.org/pipermail/flashrom/2012-April/009124.html first boot succeed (I had no vga output in boot (probably did something wrong with vga rom) but system came up).
Today I just switched from the BIOS to coreboot again and the screen brightness was very low...try increasing that trough the keyboard buttons.
Result were as shaky as described in here http://www.flashrom.org/pipermail/flashrom/2012-April/009127.html but things seemed to work
Now I thought things wouldn't be critical anymore... Then I run bucts 0, didn't save the output (damm). then I shut down the system then pressing of the power button result in endless beeping stop that the first time quiet early... Do I have a beeping brick now?
Maybe bucts didn't work? like if you did it not as root. In that case that produces that beeping(I had the same issue) a quick solution is to remove all the powers(including the CMOS battery) to clear the bucts register.
Denis.