Re: [coreboot] [LinuxBIOS] A8N5X port (new patch)

[Robert Millan]

On Thu, Nov 20, 2008 at 02:46:56PM +0100, Robert Millan wrote:
> doesn't:
>
> - ps/2 keyboard

Uwe pointed out that ps/2 keyboard can be fixed by simply reverting my
changes in Config.lb.  They were based on lspnp output, which is wrong.

I confirm that ps/2 keyboard works now, although PCI no longer (as it used
to).  I'll run a regression test.
> Signed-off-by: Robert Millan <[e-mail]>
>
> The following files are copied from the repository:
>
> svn mkdir src/mainboard/asus/a8n5x
>   svn copy src/mainboard/asus/a8n_e/Config.lb src/mainboard/asus/a8n5x/
>   svn copy src/mainboard/asus/a8n_e/Options.lb src/mainboard/asus/a8n5x/
>   svn copy src/mainboard/asus/a8n_e/cmos.layout src/mainboard/asus/a8n5x/
>   svn mkdir targets/asus/a8n5x
>   svn copy targets/asus/a8n_e/Config.lb targets/asus/a8n5x/
>
> Index: src/mainboard/asus/a8n5x/Config.lb
> ===================================================================
> --- src/mainboard/asus/a8n5x/Config.lb	(revision 0)
> +++ src/mainboard/asus/a8n5x/Config.lb	(working copy)
> @@ -165,66 +165,33 @@ chip northbridge/amd/amdk8/root_complex	
>            device pci 0.0 on end			# HT
>            device pci 1.0 on			# LPC
>              chip superio/ite/it8712f		# Super I/O
> -              device pnp 2e.0 on		# Floppy
> +              device pnp 2e.7 on		# Floppy
>                  io 0x60 = 0x3f0
>                  irq 0x70 = 6
>                  drq 0x74 = 2
>                end
> -              device pnp 2e.1 on		# Com1
> +              device pnp 2e.8 on		# Com1
>                  io 0x60 = 0x3f8
>                  irq 0x70 = 4
>                end
> -              device pnp 2e.2 off		# Com2 (N/A on this board)
> -                io 0x60 = 0x2f8
> -                irq 0x70 = 3
> -              end
> -              device pnp 2e.3 on		# Parallel port
> +              device pnp 2e.9 on		# Parallel port
>                  io 0x60 = 0x378
>                  irq 0x70 = 7
>                  drq 0x74 = 3
>                end
> -              device pnp 2e.4 on		# Environment controller
> -                io 0x60 = 0x290
> -                io 0x62 = 0x0000
> -                irq 0x70 = 0x00
> -              end
> -              device pnp 2e.5 on		# PS/2 keyboard
> +              device pnp 2e.a on		# PS/2 keyboard
>                  io 0x60 = 0x60
>                  io 0x62 = 0x64
>                  irq 0x70 = 1
>                  irq 0x71 = 2
>                end
> -              device pnp 2e.6 on		# PS/2 mouse
> -                irq 0x70 = 12
> -                irq 0x71 = 2
> -              end
> -              device pnp 2e.7 on		# GPIO config
> -                io 0x60 = 0x0800
> -                # Set GPIO 1 & 2
> -                io 0x25 = 0x0000
> -                # Set GPIO 3 & 4
> -                io 0x27 = 0x2540
> -                # GPIO Polarity for Set 3
> -                io 0xb2 = 0x2100
> -                # GPIO Pin Internal Pull up for Set 3
> -                io 0xba = 0x0100
> -                # Simple I/O register config
> -                io 0xc0 = 0x0000
> -                io 0xc2 = 0x2540
> -                io 0xc8 = 0x0000
> -                io 0xca = 0x0500
> -              end
> -              device pnp 2e.8 on		# Midi port
> +              device pnp 2e.b on		# Midi port
>                  io 0x60 = 0x300
>                  irq 0x70 = 10
>                end
> -              device pnp 2e.9 on		# Game port
> +              device pnp 2e.c on		# Game port
>                  io 0x60 = 0x201
>                end
> -              device pnp 2e.a off		# IR (N/A on this board)
> -                io 0x60 = 0x310
> -                irq 0x70 = 11
> -              end
>              end
>            end
>            device pci 1.1 on			# SM 0
> Index: src/mainboard/asus/a8n5x/mptable.c
> ===================================================================
> --- src/mainboard/asus/a8n5x/mptable.c	(revision 0)
> +++ src/mainboard/asus/a8n5x/mptable.c	(revision 0)
> @@ -0,0 +1 @@
> +#include "../mainboard/asus/a8n_e/mptable.c"
> Index: src/mainboard/asus/a8n5x/irq_tables.c
> ===================================================================
> --- src/mainboard/asus/a8n5x/irq_tables.c	(revision 0)
> +++ src/mainboard/asus/a8n5x/irq_tables.c	(revision 0)
> @@ -0,0 +1 @@
> +#include "../mainboard/asus/a8n_e/irq_tables.c"
> Index: src/mainboard/asus/a8n5x/mainboard.c
> ===================================================================
> --- src/mainboard/asus/a8n5x/mainboard.c	(revision 0)
> +++ src/mainboard/asus/a8n5x/mainboard.c	(revision 0)
> @@ -0,0 +1 @@
> +#include "../mainboard/asus/a8n_e/mainboard.c"
> Index: src/mainboard/asus/a8n5x/cache_as_ram_auto.c
> ===================================================================
> --- src/mainboard/asus/a8n5x/cache_as_ram_auto.c	(revision 0)
> +++ src/mainboard/asus/a8n5x/cache_as_ram_auto.c	(revision 0)
> @@ -0,0 +1 @@
> +#include "../mainboard/asus/a8n_e/cache_as_ram_auto.c"
> Index: src/mainboard/asus/a8n5x/get_bus_conf.c
> ===================================================================
> --- src/mainboard/asus/a8n5x/get_bus_conf.c	(revision 0)
> +++ src/mainboard/asus/a8n5x/get_bus_conf.c	(revision 0)
> @@ -0,0 +1 @@
> +#include "../mainboard/asus/a8n_e/get_bus_conf.c"
> Index: targets/asus/a8n5x/Config.lb
> ===================================================================
> --- targets/asus/a8n5x/Config.lb	(revision 0)
> +++ targets/asus/a8n5x/Config.lb	(working copy)
> @@ -19,8 +19,8 @@
>  ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
>  ##
>
> -target asus_a8n_e
> -mainboard asus/a8n_e
> +target asus_a8n5x
> +mainboard asus/a8n5x
>
> romimage "normal"
>   option USE_FAILOVER_IMAGE = 0
>