[coreboot] r3116 - in trunk/coreboot-v2/src: config mainboard/gigabyte/m57sli superio/ite/it8716f

Author: ward
Date: 2008-02-25 20:36:20 +0100 (Mon, 25 Feb 2008)
New Revision: 3116

Added:
   trunk/coreboot-v2/src/mainboard/gigabyte/m57sli/fanctl.c
Modified:
   trunk/coreboot-v2/src/config/Options.lb
   trunk/coreboot-v2/src/mainboard/gigabyte/m57sli/Config.lb
   trunk/coreboot-v2/src/mainboard/gigabyte/m57sli/Options.lb
   trunk/coreboot-v2/src/superio/ite/it8716f/superio.c
Log:

This patch adds automatic fan control for the CPU fan on the m57sli
board.

This is done via the ec_init routine in a source file in the
mainboard/gigabyte/m57sli directory. A Config variable 'HAVE_FANCTL' has been
added to notify superio.c to get the ec_init externally.

I (Ward) have tested this on the PLCC and the SOIC/SPI version of this board.
It works.

Signed-off-by: Ronald Hoogenboom 
Acked-by: Ward Vandewege

Modified: trunk/coreboot-v2/src/config/Options.lb
===================================================================
--- trunk/coreboot-v2/src/config/Options.lb	2008-02-25 10:15:10 UTC (rev 3115)
+++ trunk/coreboot-v2/src/config/Options.lb	2008-02-25 19:36:20 UTC (rev 3116)
@@ -861,6 +861,11 @@
 # Misc device options
 ###############################################

+define HAVE_FANCTL
+	default 0
+	export used
+	comment "Include board specific FAN control initialization"
+end
 define CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
    default 0
    export used

Modified: trunk/coreboot-v2/src/mainboard/gigabyte/m57sli/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/gigabyte/m57sli/Config.lb	2008-02-25 10:15:10 UTC (rev 3115)
+++ trunk/coreboot-v2/src/mainboard/gigabyte/m57sli/Config.lb	2008-02-25 19:36:20 UTC (rev 3116)
@@ -206,6 +206,10 @@
     end
 end

+if HAVE_FANCTL
+	object fanctl.o
+end
+
 ##
 ## Setup RAM
 ##

Modified: trunk/coreboot-v2/src/mainboard/gigabyte/m57sli/Options.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/gigabyte/m57sli/Options.lb	2008-02-25 10:15:10 UTC (rev 3115)
+++ trunk/coreboot-v2/src/mainboard/gigabyte/m57sli/Options.lb	2008-02-25 19:36:20 UTC (rev 3116)
@@ -115,6 +115,7 @@

uses CONFIG_USE_PRINTK_IN_CAR

+uses HAVE_FANCTL
 ###
 ### Build options
 ###
@@ -140,6 +141,11 @@
 default CONFIG_LB_MEM_TOPK=2048

##
+## Set-up automatic fan control
+##
+default HAVE_FANCTL=1
+
+##
 ## Build code for the fallback boot
 ##
 default HAVE_FALLBACK_BOOT=1

Added: trunk/coreboot-v2/src/mainboard/gigabyte/m57sli/fanctl.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/gigabyte/m57sli/fanctl.c	                        (rev 0)
+++ trunk/coreboot-v2/src/mainboard/gigabyte/m57sli/fanctl.c	2008-02-25 19:36:20 UTC (rev 3116)
@@ -0,0 +1,57 @@
+#include <arch/io.h>
+
+static void write_index(uint16_t port_base, uint8_t reg, uint8_t value)
+{
+	outb(reg, port_base);
+	outb(value, port_base + 1);
+}
+
+static const struct {
+	uint8_t index, value;
+} sequence[]= {
+	/* Set FAN_CTL control register (0x14) polarity to high, and
+	   activate fans 1, 2 and 3. */
+	{ 0x14, 0x87},
+	/* set the correct sensor types 1,2 thermistor; 3 diode */
+	{ 0x51, 0x1c},
+	/* set the 'zero' voltage for diode type sensor */
+	{ 0x5c, 0x80},
+//	{ 0x56, 0xe5},
+//	{ 0x57, 0xe5},
+	{ 0x59, 0xe5},
+	{ 0x5c, 0x00},
+	/* fan1 (controlled by temp3) control parameters */
+	/* fan off limit */
+	{ 0x60, 0xff},
+	/* fan start limit */
+	{ 0x61, 0x14},
+	/* ???? */
+//	{ 0x62, 0x00},
+	/* start PWM */
+	{ 0x63, 0x27},
+	/* smooth and slope PWM */
+	{ 0x64, 0x90},
+	/* direct-down and interval */
+	{ 0x65, 0x03},
+	/* fan1 auto controlled by temp3 */
+	{ 0x15, 0x82},
+	/* fan2 soft controlled, max speed */
+	{ 0x16, 0x7f},
+	/* fan3 soft controlled, 75% speed */
+	{ 0x17, 0x60},
+	/* all fans enable, fan1 ctl smart */
+	{ 0x13, 0x71}
+};
+
+#define ARRAYSIZE(x) sizeof x/sizeof *x
+
+/*
+ * Called from superio.c
+ */
+void init_ec(uint16_t base)
+{
+	int i;
+	for (i=0; i<ARRAYSIZE(sequence); i++) {
+		write_index(base, sequence[i].index, sequence[i].value);
+	}
+}

Modified: trunk/coreboot-v2/src/superio/ite/it8716f/superio.c
===================================================================
--- trunk/coreboot-v2/src/superio/ite/it8716f/superio.c	2008-02-25 10:15:10 UTC (rev 3115)
+++ trunk/coreboot-v2/src/superio/ite/it8716f/superio.c	2008-02-25 19:36:20 UTC (rev 3116)
@@ -62,6 +62,9 @@
    return inb(port_base + 1);
 }

+#ifdef HAVE_FANCTL
+extern void init_ec(uint16_t base);
+#else
 static void init_ec(uint16_t base)
 {
    uint8_t value;
@@ -77,6 +80,7 @@
    printk_debug("FAN_CTL: reg = 0x%04x, writing value = 0x%02x\r\n",
    	     base + 0x14, value | 0x87);
 }
+#endif

static void it8716f_init(device_t dev)
 {