On Tue, May 01, 2007 at 12:59:40PM -0700, yhlu wrote:
in cache_as_ram_auto.c or mainboard.c
depends on if the initialization need it asap for example start the FAN asap
Actually the fans default to full-speed at power on, so that's not a problem.
I'm now working on the Tyan s2881 board. I need to set a few temperature offsets for the adt7463 chip, again, specific for this motherboard.
I tried adding them to mainboard.c, but that is too early in the process; if I add a mainboard_init there (hooked into the init action of mainboard_operations), this code is executed quite a bit before the adt7463 chip is enabled, which is not what I want.
Is there a way to get mainboard specific code to be executed much later in the boot process, after all devices have been enabled?
Thanks, Ward.