Author: mjones Date: 2008-10-30 21:17:11 +0100 (Thu, 30 Oct 2008) New Revision: 3711
Modified: trunk/coreboot-v2/src/mainboard/tyan/s2912_fam10/Config.lb trunk/coreboot-v2/src/mainboard/tyan/s2912_fam10/Options.lb trunk/coreboot-v2/targets/tyan/s2912_fam10/Config-abuild.lb trunk/coreboot-v2/targets/tyan/s2912_fam10/Config.lb Log: Here's a patch towards r3690 upping the ROM size for the S2912 Fam10 target to 1M. Both regular and abuild images have been boot tested successfully.
Signed-off-by: Arne Georg Gleditsch arne.gleditsch@numascale.com Acked-by: Marc Jones marc.jones@amd.com
Modified: trunk/coreboot-v2/src/mainboard/tyan/s2912_fam10/Config.lb =================================================================== --- trunk/coreboot-v2/src/mainboard/tyan/s2912_fam10/Config.lb 2008-10-30 19:34:44 UTC (rev 3710) +++ trunk/coreboot-v2/src/mainboard/tyan/s2912_fam10/Config.lb 2008-10-30 20:17:11 UTC (rev 3711) @@ -92,7 +92,7 @@ else makerule ./cache_as_ram_auto.inc depends "$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) option_table.h" - action "$(CC) -I$(TOP)/src -I. $(CFLAGS) $(CPPFLAGS) $(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CFLAGS) $(CPPFLAGS) $(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" action "perl -e 's/.rodata/.rom.data/g' -pi $@" action "perl -e 's/.text/.section .rom.text/g' -pi $@" end @@ -105,7 +105,7 @@ if CONFIG_AP_CODE_IN_CAR makerule ./apc_auto.o depends "$(MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" end ldscript /arch/i386/init/ldscript_apc.lb end @@ -345,7 +345,7 @@ device pci 6.0 on chip drivers/pci/onboard device pci 4.0 on end - register "rom_address" = "0xfff80000" + register "rom_address" = "0xfff00000" end end # PCI device pci 6.1 off end # AZA
Modified: trunk/coreboot-v2/src/mainboard/tyan/s2912_fam10/Options.lb =================================================================== --- trunk/coreboot-v2/src/mainboard/tyan/s2912_fam10/Options.lb 2008-10-30 19:34:44 UTC (rev 3710) +++ trunk/coreboot-v2/src/mainboard/tyan/s2912_fam10/Options.lb 2008-10-30 20:17:11 UTC (rev 3711) @@ -126,7 +126,7 @@ ## ## ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 +default ROM_SIZE=1024*1024 #default ROM_SIZE=0x100000
## @@ -135,9 +135,7 @@ #default FALLBACK_SIZE=131072 #default FALLBACK_SIZE=0x40000
-#FALLBACK: ROM_SIZE-4K -default FALLBACK_SIZE=ROM_SIZE-0x01000 -#FAILOVER: 4K +default FALLBACK_SIZE=0x3f000 default FAILOVER_SIZE=0x01000
#more 1M for pgtbl
Modified: trunk/coreboot-v2/targets/tyan/s2912_fam10/Config-abuild.lb =================================================================== --- trunk/coreboot-v2/targets/tyan/s2912_fam10/Config-abuild.lb 2008-10-30 19:34:44 UTC (rev 3710) +++ trunk/coreboot-v2/targets/tyan/s2912_fam10/Config-abuild.lb 2008-10-30 20:17:11 UTC (rev 3711) @@ -21,26 +21,36 @@ target tyan_s2912_fam10 mainboard tyan/s2912_fam10
+option CC="CROSSCC" +option CROSS_COMPILE="CROSS_PREFIX" +option HOSTCC="CROSS_HOSTCC" + __COMPRESSION__
-option ROM_SIZE = 0x80000 -option FALLBACK_SIZE = 0x40000 -option FAILOVER_SIZE = 0x00 - romimage "normal" + option USE_FAILOVER_IMAGE=0 option USE_FALLBACK_IMAGE=0 - option ROM_IMAGE_SIZE=0x24000 + option ROM_IMAGE_SIZE=0x20000 option XIP_ROM_SIZE=0x40000 option COREBOOT_EXTRA_VERSION=".0-Normal" payload __PAYLOAD__ end
romimage "fallback" + option USE_FAILOVER_IMAGE=0 option USE_FALLBACK_IMAGE=1 - option ROM_IMAGE_SIZE=0x24000 + option ROM_IMAGE_SIZE=0x20000 option XIP_ROM_SIZE=0x40000 option COREBOOT_EXTRA_VERSION=".0-Fallback" payload __PAYLOAD__ end
-buildrom ./coreboot.rom ROM_SIZE "normal" "fallback" +romimage "failover" + option USE_FAILOVER_IMAGE=1 + option USE_FALLBACK_IMAGE=0 + option ROM_IMAGE_SIZE=FAILOVER_SIZE + option XIP_ROM_SIZE=FAILOVER_SIZE + option COREBOOT_EXTRA_VERSION=".0-Failover" +end + +buildrom ./coreboot.rom ROM_SIZE "normal" "fallback" "failover"
Modified: trunk/coreboot-v2/targets/tyan/s2912_fam10/Config.lb =================================================================== --- trunk/coreboot-v2/targets/tyan/s2912_fam10/Config.lb 2008-10-30 19:34:44 UTC (rev 3710) +++ trunk/coreboot-v2/targets/tyan/s2912_fam10/Config.lb 2008-10-30 20:17:11 UTC (rev 3711) @@ -24,80 +24,27 @@ target s2912_fam10 mainboard tyan/s2912_fam10
-# This builds a fallback-only BIOS that fits in a 512K ROM. The S2912 onboard -# flash is 1024K, so for use with that pad resulting ROM with 512KB lead-in. +# Make room for ATI ES1000 VGA ROM +option ROM_SIZE=ROM_SIZE-44*1024
-# Make room for ES1000 VGA ROM -option ROM_SIZE=(512-44)*1024 - -# serengeti_leopard romimage "normal" -# 48K for SCSI FW -# option ROM_SIZE = 475136 -# 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 -# 64K for Etherboot -# option ROM_SIZE = 458752 -# 44k for atixx.rom -# option ROM_SIZE = 479232 - option USE_FAILOVER_IMAGE=0 + option USE_FAILOVER_IMAGE=0 option USE_FALLBACK_IMAGE=0 -# option ROM_IMAGE_SIZE=0x13800 -# option ROM_IMAGE_SIZE=0x18800 option ROM_IMAGE_SIZE=0x20000 -# option ROM_IMAGE_SIZE=0x15800 option XIP_ROM_SIZE=0x40000 option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" -# payload ../../../payloads/tg3--ide_disk.zelf -# payload ../../../payloads/filo.elf -# payload ../../../payloads/filo_mem.elf -# payload ../../../payloads/filo.zelf -# payload ../../../payloads/tg3--filo_hda2.zelf -# payload ../../../payloads/tg3.zelf -# payload ../../../../payloads/tg3_vga.zelf -# payload ../../../../payloads/tg3--filo_hda2_vga.zelf -# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf -# payload ../../../../payloads/forcedeth--filo_hda2_vga.zelf - payload ../../../../payloads/forcedeth--filo_hda2_vga_5_4_2_mcp55.zelf -# payload ../../../payloads/tg3_com2.zelf -# payload ../../../payloads/e1000--filo.zelf -# payload ../../../payloads/tg3--e1000--filo.zelf -# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf -# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf -# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf +# payload ../../../../payloads/forcedeth--filo_hda2_vga_5_4_2_mcp55.zelf + payload ../payload.elf end
romimage "fallback" option USE_FAILOVER_IMAGE=0 option USE_FALLBACK_IMAGE=1 -# option ROM_IMAGE_SIZE=0x13800 -# option ROM_IMAGE_SIZE=0x19800 option ROM_IMAGE_SIZE=0x20000 -# option ROM_IMAGE_SIZE=0x15800 - option XIP_ROM_SIZE=0x20000 + option XIP_ROM_SIZE=0x40000 option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" -# payload ../../../payloads/tg3--ide_disk.zelf -# payload ../../../payloads/filo.elf -# payload ../../../payloads/filo_mem.elf -# payload ../../../payloads/filo.zelf -# payload ../../../payloads/tg3--filo_hda2.zelf -# payload ../../../payloads/tg3.zelf -# payload ../../../../payloads/tg3_vga.zelf -# payload ../../../../payloads/memtest -# payload ../../../../payloads/e1000_vga.zelf -# payload ../../../../payloads/tg3--filo_hda2_vga.zelf -# payload ../../../../payloads/filo_hda.zelf -# payload ../../../../payloads/adlo.elf -# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf -# payload ../../../../payloads/forcedeth_mcp55_filo_hda2.zelf - payload ../../../../payloads/forcedeth--filo_hda2_vga_5_4_2_mcp55.zelf -# payload ../../../../payloads/forcedeth--filo_hda2_vga.zelf -# payload ../../../payloads/tg3_com2.zelf -# payload ../../../payloads/e1000--filo.zelf -# payload ../../../payloads/tg3--e1000--filo.zelf -# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf -# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf -# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf +# payload ../../../../payloads/forcedeth--filo_hda2_vga_5_4_2_mcp55.zelf + payload ../payload.elf end
romimage "failover" @@ -108,5 +55,4 @@ option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover" end
-#buildrom ./coreboot.rom ROM_SIZE "normal" "failover" -buildrom ./coreboot.rom ROM_SIZE "fallback" "failover" +buildrom ./coreboot.rom ROM_SIZE "normal" "fallback" "failover"