I build the ADLO payload (note I'm not using etherboot) and linuxbios (using USE_ELF_BOOT option). created the romimage from these and burnt the image on flash rom. But when I try to boot from it I get the following error
********************************************************* Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.2
203:init_bytes() - zkernel_start:0xfffc0000 zkernel_mask:0x0000007f Searching for 16 byte tags 64:rom_read_bytes() - overflowed source buffer. max_block = 3 init_bytes found 0 tags Cannot Load ELF Image
*********************************************************
What could be wrong here?
Thanks, Shubhangi
-----Original Message----- From: linuxbios-admin@clustermatic.org [mailto:linuxbios-admin@clustermatic.org]On Behalf Of Eric W. Biederman Sent: Saturday, April 26, 2003 6:27 AM To: Shubhangi Jadhav Cc: LinuxBIOS Subject: Re: setting USE_ELF_BOOT
"Shubhangi Jadhav" shubhangi.jadhav@patni.com writes:
Hi,
When do we need to set USE_ELF_BOOT option ?
Whenever you are not using the deprecated builtin linux loader.
Is elfboot loader required to load ADLO ? or is it required only in case of etherboot?
The ELF loader is required.
Eric
_______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios