:( I Appreciate the buying advice but the issue is that I have an *extra* crappy clip I need the little wires for, as stated before I already bought another one that came with wires.
I lack the skills to properly solder something that small, and they are SMALL, each wire is 1/32" with 1/32" spacing.
I bought my cableless clip at a local electronics store, then they refused to take it back when I couldn't find any wires ($10 wasted) - it obviously isn't ran by one of us because there is not even the smallest level of curation no wonder those spots go out of business.
On 03/08/2017 02:38 PM, Merlin Büge wrote:
On Wed, 8 Mar 2017 20:24:59 +0100 (CET) i1w5d7gf38keg@tutanota.com wrote:
There are none cables that just fit. You have to solder (like its been done by chinese workers on the ready ones you can get). You can get soic8 and soic16 presoldered. For example you can get the 16 with all 16 pins soldered here: www.ebay.com/itm/321899798260 Or soldered to fit on normal 8-pin flasher (the useless pins are simply not beeing soldered): www.ebay.com/itm/142241743115
Or get Pomona clips (5250 and 5252), then the dupont cables will fit. But imo soldering is more reliable, which is good, because when flashing externally there are quite some things which can cause problems.
- Mar 2017 09:26 by Taiidan@gmx.com:
Thanks martin but the clip I have needs the smaller cables like the ones in this photo as they didn't space the connectors enough for dupont cables.
https://sc01.alicdn.com/kf/HTB1jVupNVXXXXXOXpXXq6xXFXXXm/SOIC8-SOP8-Test-Cli... https://www.aliexpress.com/store/product/SOP16-SOIC16-Flash-Chip-Test-Clips-...
-- coreboot mailing list: > coreboot@coreboot.org https://www.coreboot.org/mailman/listinfo/coreboot