Quoting joe@smittys.pointclark.net:
Quoting joe@smittys.pointclark.net:
To check this with superiotool I have to be able to dump the "Runtime Registers", this is where the GPIO's are (See the SMSC lpc47m192 datasheet for more info). Currently superiotool does not dump these registers so modifications will be required.
I was relying on the new extended superiotool dumping functionality. That doesn't exist yet for your superio, so I should have written "...can find out with superiotool (once that has GPIO dumping support for your superio) and...". Thanks for correcting me.
Well, I wasn't able to get a dump of the "Runtime Registers" with superiotool working, but I was able to get a dump of it with the old dd method, there are alot of differences........maybe one of these GPIO settings is causing my flashrom issue??? It is hard to say without schmatics, but I could always try one register at a time until it works???
Thanks - Joe
rm4100 00 00 00 00 dc 00 14 0f e7 00 00 00 00 00 00 00 02 00 14 0f ce 00 00 00 00 00 00 00 00 00 03 02 81 00 00 01 01 01 01 01 01 01 01 01 01 01 00 01 01 01 01 05 05 00 00 00 04 01 01 01 01 86 01 05 05 05 04 05 04 05 04 01 01 00 00 00 04 d0 00 07 00 00 00 00 00 00 00 00 50 ff ff 00 00 00 00 00
coreboot 00 00 00 00 d8 00 14 0f 67 00 00 00 00 00 00 00 02 00 14 0f c6 00 00 00 00 00 00 00 00 00 03 02 81 00 00 01 01 01 01 01 01 01 01 01 01 01 00 02 01 01 01 01 01 00 00 05 04 01 01 01 01 01 01 01 01 01 00 01 01 01 01 01 01 00 00 00 04 d0 04 23 00 00 00 00 00 00 00 00 50 ff ff 00 00 00 00 00