Re: [LinuxBIOS] A8N5X port

[Stefan Reinauer]

* Uwe Hermann  [070927 19:14]:
> No duplicated code whatsoever. Sure, this may not be too elegant
> (there's some room for improvements, though), but it's definately a
> _lot_ better than duplicating all those files.

Another question: If that code needs to be duplicated for each of those
boards, is it generic (NB, SB, SUPERIO) code?
> +if CONFIG_BOARD_A8N_E

ouch.. this is really nasty ;-)

And it will potentially make it hard for us in v3..
> +if CONFIG_BOARD_A8N5X
> device pci_domain 0 on			# PCI domain
> chip northbridge/amd/amdk8			# mc0
>  device pci 18.0 on			# Northbridge
>    # Devices on link 0, link 0 == LDT 0
>    chip southbridge/nvidia/ck804		# Southbridge
>      device pci 0.0 on end			# HT
>      device pci 1.0 on			# LPC
>        chip superio/ite/it8712f		# Super I/O
>          device pnp 2e.7 off		# Floppy
>            io 0x60 = 0x3f0
>            irq 0x70 = 6
>            drq 0x74 = 2
>          end
>          device pnp 2e.8 on		# Com1
>            io 0x60 = 0x3f8
>            irq 0x70 = 4
>          end
>          device pnp 2e.9 on		# Parallel port
>            io 0x60 = 0x378
>            irq 0x70 = 7
>            drq 0x74 = 3
>          end
>          device pnp 2e.a on		# PS/2 keyboard
>            io 0x60 = 0x60
>            io 0x62 = 0x64
>            irq 0x70 = 1
>            irq 0x71 = 2
>          end
>          device pnp 2e.b off end		# Midi port
>          device pnp 2e.c off end		# Game port
>        end
>      end
>      device pci 1.1 on			# SM 0
>        # chip drivers/generic/generic #dimm 0-0-0
>        #   device i2c 50 on end
>        # end
>        # chip drivers/generic/generic #dimm 0-0-1
>        #   device i2c 51 on end
>        # end
>        # chip drivers/generic/generic #dimm 0-1-0
>        #   device i2c 52 on end
>        # end
>        # chip drivers/generic/generic #dimm 0-1-1
>        #   device i2c 53 on end
>        # end
>        # chip drivers/generic/generic #dimm 1-0-0
>        #   device i2c 54 on end
>        # end
>        # chip drivers/generic/generic #dimm 1-0-1
>        #   device i2c 55 on end
>        # end
>        # chip drivers/generic/generic #dimm 1-1-0
>        #   device i2c 56 on end
>        # end
>        # chip drivers/generic/generic #dimm 1-1-1
>        #   device i2c 57 on end
>        # end
>      end
>      device pci 2.0 on end			# USB 1.1
>      device pci 2.1 on end			# USB 2
>      device pci 4.0 off end		# Onboard audio (ACI)
>      device pci 4.1 off end		# Onboard modem (MCI)
>      device pci 6.0 on end			# IDE
>      device pci 7.0 on end			# SATA 1
>      device pci 8.0 on end			# SATA 0
>      device pci 9.0 on end			# PCI
>      device pci a.0 on end			# NIC
>      device pci b.0 on end			# PCI E 3
>      device pci c.0 on end			# PCI E 2
>      device pci d.0 on end			# PCI E 1
>      device pci e.0 on end			# PCI E 0
>      register "ide0_enable" = "1"
>      register "ide1_enable" = "1"
>      register "sata0_enable" = "1"
>      register "sata1_enable" = "1"
>      # register "mac_eeprom_smbus" = "3"
>      # register "mac_eeprom_addr" = "0x51"
>    end
>  end
>  device pci 18.1 on end
>  device pci 18.2 on end
>  device pci 18.3 on end
> end
> end
>
> +end
>
> +end	# if