Enabling cache occurs. Check your serial output to see if it's still there, as it should be.
Ok, I will have a look. thanks
Enable Caching is debugged with printk_info. Therefore it should shown under LogLevel 8
But I can't see this stuff in the current log file. Furthermore, I have never seen this message :(
What happens here?!
What could be the reasons for failing?
chris
ÿ
LinuxBIOS-1.1.8.0Fallback Wed May 10 05:57:02 CEST 2006 starting... Setting up default parameters for memory MC_MEM_CNTRL1 = 92162000 Sizing memory Probing for DIMM0 Found DIMM0 Page Size: 00001000 Component Banks: 4 Module Banks: 1 DIMM size: 04000000 Probing for DIMM1 MC_BANK_CFG = 00701420 MC_MEM_CNTRL1 = 92162000 Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.1.8.0Fallback Wed May 10 05:57:02 CEST 2006 booting... end 61ae1378, start 0 32-bit delta 346 calibrate_tsc 32-bit result is 346 clocks_per_usec: 346 Enumerating buses... scan_static_bus for Root Device Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0000 enabled PCI_DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [1078/0001] ops PCI: 00:00.0 [1078/0001] enabled PCI: devfn 0x8, bad id 0xffffffff PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: 00:09.0 [10ea/5000] enabled PCI: devfn 0x49, bad id 0xffffffff PCI: devfn 0x4a, bad id 0xffffffff PCI: devfn 0x4b, bad id 0xffffffff PCI: devfn 0x4c, bad id 0xffffffff PCI: devfn 0x4d, bad id 0xffffffff PCI: devfn 0x4e, bad id 0xffffffff PCI: devfn 0x4f, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: devfn 0x88, bad id 0xffffffff PCI: 00:12.0 [1078/0100] bus ops southbridge_enable: dev is 00021b00 PCI: 00:12.0 [1078/0100] enabled PCI: 00:12.1 [1078/0101] disabled PCI: 00:12.2 [1078/0102] ops cs5530_ide: ide_enable PCI: 00:12.2 [1078/0102] enabled PCI: 00:12.3 [1078/0103] disabled PCI: 00:12.4 [1078/0104] disabled PCI: devfn 0x95, bad id 0xffffffff PCI: devfn 0x96, bad id 0xffffffff PCI: devfn 0x97, bad id 0xffffffff malloc Enter, size 668, free_mem_ptr 0002a000 malloc 0x0002a000 PCI: 00:13.0 [0e11/a0f8] enabled PCI: devfn 0xa0, bad id 0xffffffff PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff scan_static_bus for PCI: 00:12.0 PNP: 002e.0 enabled PNP: 002e.1 enabled PNP: 002e.2 enabled PNP: 002e.3 disabled PNP: 002e.4 enabled PNP: 002e.5 enabled PNP: 002e.6 enabled PNP: 002e.7 enabled PNP: 002e.8 enabled scan_static_bus for PCI: 00:12.0 done PCI: pci_scan_bus returning with max=00 scan_static_bus for Root Device done done Allocating resources... Reading resources... Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 northbridge.c:pci_domain_read_resources() PCI_DOMAIN: 0000 read_resources bus 0 link: 0 PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done Root Device read_resources bus 0 link: 0 done PCI: 00:12.2 20 * [0x00000400 - 0x0000047f] io Root Device compute_allocate_io: base: 00000480 size: 00000080 align: 7 gran: 0 done Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:09.0 10 * [0x00000000 - 0x00ffffff] mem PCI: 00:13.0 10 * [0x01000000 - 0x01000fff] mem Root Device compute_allocate_mem: base: 01001000 size: 01001000 align: 24 gran: 0 done Done reading resources. Allocating VGA resource PCI: 00:09.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... Root Device compute_allocate_io: base: 00001000 size: 00000080 align: 7 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:12.2 20 * [0x00001000 - 0x0000107f] io Root Device compute_allocate_io: base: 00001080 size: 00000080 align: 7 gran: 0 done Root Device compute_allocate_mem: base: fd000000 size: 01001000 align: 24 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:09.0 10 * [0xfd000000 - 0xfdffffff] mem PCI: 00:13.0 10 * [0xfe000000 - 0xfe000fff] mem Root Device compute_allocate_mem: base: fe001000 size: 01001000 align: 24 gran: 0 done Root Device assign_resources, bus 0 link: 0 BC_DRAM_TOP = 0x03ffffff MC_GBASE_ADD = 0x00000080 I would set ram size to 64 Mbytes PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 PCI: 00:09.0 10 <- [0x00fd000000 - 0x00fdffffff] mem PCI: 00:09.0 30 <- [0x00fffc0000 - 0x00fffcffff] romem PCI: 00:12.2 20 <- [0x0000001000 - 0x000000107f] io PCI: 00:13.0 10 <- [0x00fe000000 - 0x00fe000fff] mem PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 Root Device assign_resources, bus 0 link: 0 Done setting resources. Done allocating resources. Enabling resources... PCI: 00:00.0 cmd <- 147 PCI: 00:09.0 subsystem <- 00/00 PCI: 00:09.0 cmd <- 143 cs5530.c: cs5530_pci_dev_enable_resources() PCI: 00:12.0 cmd <- 14f PCI: 00:12.2 cmd <- 141 PCI: 00:13.0 cmd <- 142 done. Initializing devices... Root Device init PCI: 00:00.0 init northbridge: northbridge_init() PCI: 00:09.0 init rom address for PCI: 00:09.0 = fffc0000 PCI Expansion ROM, signature 0xaa55, INIT size 0x8000, data ptr 0x0031 PCI ROM Image, Vendor 10ea, Device 5000, PCI ROM Image, Class Code 030000, Code Type 00 copying VGA ROM Image from 0xfffc0000 to 0xc0000, 0x8000 bytes entering emulator found int10 vector at c41b4 found int10 vector at c41b4 found int10 vector at c41b4 halt_sys: file /root/src/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4392 halted PCI: 00:12.0 init cs5530: southbridge_init PNP: 002e.0 init PNP: 002e.1 init PNP: 002e.2 init PNP: 002e.4 init PNP: 002e.5 init PNP: 002e.6 init PNP: 002e.7 init PNP: 002e.8 init PCI: 00:12.2 init cs5530_ide: ide_init PCI: 00:13.0 init Devices initialized Copying IRQ routing tables to 0xf0000...done. Verifing copy of IRQ routing tables at 0xf0000...done Checking IRQ routing table consistency... check_pirq_routing_table() - irq_routing_table located at: 0x000f0000 done. Moving GDT to 0x500...ok Wrote linuxbios table at: 00000530 - 000006c4 checksum 372e
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3