Re: [coreboot] patch: set dbe62 to have com2 on com1 address

[Marc Jones]

ron minnich wrote:
> On Wed, Mar 5, 2008 at 5:22 AM, Carl-Daniel Hailfinger
>  wrote:
> > If you look at the dbe61 dts, you can see the same settings except that
> >  dbe61 additionally sets com2_irq = "4".
>
> and there is a good question. I might have misread the v2 code, I will
> have to go back and check.
>
> But will com2 still interrupt on irq 3 no matter what? I'm never sure
> how things go on this chipset.
>
> ron

There is no chipset default. Each piece needs to be setup. If you didn't 
set it in the mainboard dts it will use the chipset dts default.
Marc