Re: [LinuxBIOS] MSI MS-6337 (i815 based)

[Uwe Hermann]

On Fri, Sep 14, 2007 at 08:31:29PM +0300, Jouni Mettälä wrote:
> I tried to flash. MS-6337 with recently added MS-6178. It was needed to put
> WP# and TBL# pins to high but since another chip is in use it is ok.
>
> With filo as payload, post card gave 10 ... pause... 80,  f8, fe ..short
> pause and ff. (+ some other codes between them)
>
> So at least ram is ok I think.
>
> With very small kernel as payload post card gave just ff.

Did you get it _that_ small? I'm using a 512KB chip, you cannot stick a
kernel into that. Did you use a bigger chip?
> I didn't do any modifications to MS6178. Probably some is needed.

Yes, definately.

Please try Corey's suggestions and send some more info on the system
(lspci -nn, lspnp -v, etc).

Uwe.