Hi, lists, I've got one ECS p6stmt motherboard based on sis630et. I have dumped pci host bridge settings: P6STMT 00:00.0 Host bridge: Silicon Integrated Systems: Unknown device 0630 (rev 30) 00: 39 10 30 06 07 00 10 22 30 00 00 06 00 20 80 00 10: 00 00 00 d8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 9e 00 c5 00 00 19 00 01 00 15 51 00 00 00 00 00 60: 0b 00 00 a1 00 00 00 00 01 50 c6 00 e0 00 00 00 70: 3f 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 20 ff 7f 1f 60 00 03 40 00 08 00 00 78 88 00 55 90: 00 00 00 00 40 00 00 01 00 00 00 00 02 00 00 00 a0: 00 00 03 01 aa 00 00 00 00 00 00 00 00 00 f8 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 02 00 20 00 07 02 00 1f 04 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SPD dump: Memory Type 0x04 Number of Row Address bits 0x0d Number of Column Address bits 0x0a Number of Sides 0x01 Number of Banks 0x04 I try to set the values just as the same as bios settings. But when ipl use stack, it hangs on copying linuxbios from DOC. It's obvious that memory init failed. I noticed that 0x8e is 0, It's very different with winfast6300's. winfast6300 0x8e is 03.
What's the problem behind it?
tks zhu
--------------------------------- Do you Yahoo!? Yahoo! Mail is new and improved - Check it out!