Hi
I`m running coreboot with an asus a8v-e Deluxe, my processor is an athlon 64 3000+ with 512Mb of RAM. When initializing coreboot I get the following output in the serial debug output.
Talking to Carl-Daniel he found weird the like stating "INIT detected", he says it looks really suspicious and he gets this kind of log message only "if something is really horribly wrong".
Log message as follows:
coreboot-2.0.0-r4368M.0Fallback Dom Jun 21 19:42:04 AMT 2009 starting... now booting... fallback
coreboot-2.0.0-r4368M.0Normal Dom Jun 21 19:41:47 AMT 2009 starting... now booting... real_main
INIT detected from --- { APICID = 00 NODEID = 00 COREID = 00} ---
Issuing SOFT_RESET... soft reset
coreboot-2.0.0-r4368M.0Fallback Dom Jun 21 19:42:04 AMT 2009 starting... now booting... fallback
coreboot-2.0.0-r4368M.0Fallback Dom Jun 21 19:42:04 AMT 2009 starting... now booting... real_main Enabling routing table for node 00 done. Enabling UP settings Disabling read/write/fill probes for UP... done. coherent_ht_finalize done core0 started: now booting... Core0 started started ap apicid: SBLink=00 NC node|link=00 entering optimize_link_incoherent_ht sysinfo->link_pair_num=0x1 entering ht_optimize_link pos=0x8a, unfiltered freq_cap=0x8075 pos=0x8a, filtered freq_cap=0x35 pos=0x6e, unfiltered freq_cap=0x75 pos=0x6e, filtered freq_cap=0x75 freq_cap1=0x35, freq_cap2=0x75 dev1 old_freq=0x6, freq=0x5, needs_reset=0x1 dev2 old_freq=0x6, freq=0x5, needs_reset=0x1 width_cap1=0x11, width_cap2=0x11 dev1 input ln_width1=0x4, ln_width2=0x4 dev1 input width=0x1 dev1 output ln_width1=0x4, ln_width2=0x4 dev1 input|output width=0x11 old dev1 input|output width=0x11 dev2 input|output width=0x11 old dev2 input|output width=0x11 after ht_optimize_link for link pair 0, reset_needed=0x1 after optimize_link_read_pointers_chain, reset_needed=0x1 K8T890 found at LDT 00 Agreed on width: 01 CPU programmed to HT freq: 05 VIA HT caps: 0075 ht reset - soft reset
coreboot-2.0.0-r4368M.0Fallback Dom Jun 21 19:42:04 AMT 2009 starting... now booting... fallback
coreboot-2.0.0-r4368M.0Normal Dom Jun 21 19:41:47 AMT 2009 starting... now booting... real_main Enabling routing table for node 00 done. Enabling UP settings Disabling read/write/fill probes for UP... done. coherent_ht_finalize done core0 started: now booting... Core0 started started ap apicid: SBLink=00 NC node|link=00 entering optimize_link_incoherent_ht sysinfo->link_pair_num=0x1 entering ht_optimize_link pos=0x8a, unfiltered freq_cap=0x8075 pos=0x8a, filtered freq_cap=0x35 pos=0x6e, unfiltered freq_cap=0x75 pos=0x6e, filtered freq_cap=0x75 freq_cap1=0x35, freq_cap2=0x75 dev1 old_freq=0x5, freq=0x5, needs_reset=0x0 dev2 old_freq=0x5, freq=0x5, needs_reset=0x0 width_cap1=0x11, width_cap2=0x11 dev1 input ln_width1=0x4, ln_width2=0x4 dev1 input width=0x1 dev1 output ln_width1=0x4, ln_width2=0x4 dev1 input|output width=0x11 old dev1 input|output width=0x11 dev2 input|output width=0x11 old dev2 input|output width=0x11 after ht_optimize_link for link pair 0, reset_needed=0x0 after optimize_link_read_pointers_chain, reset_needed=0x0 K8T890 found at LDT 00 Agreed on width: 01 CPU programmed to HT freq: 05 VIA HT caps: 0075 Current fid_cur: 0xa, fid_max: 0xa Requested fid_new: 0xa Ram1.00 setting up CPU00 northbridge registers done. Ram2.00 Device error Device error Device error Unbuffered 200Mhz Interleaved RAM end at 0x00080000 kB Lower RAM end at 0x00080000 kB Ram3 Initializing memory: done Ram4 v_esp=000cee78 testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region:
Regards....