On Tue, Mar 25, 2008 at 02:03:14PM +0100, Klaus Stammermann wrote:
Can you send a full log?
I changed kernel to get serial output. So it is not same error message but I think it is same problem. So this is my boot log:
coreboot-2.0.0.0-Fallback Mo 10. Mär 15:34:24 CET 2008 starting...
..
FILO version 0.5 (klausst at thor) Mon Mar 10 15:33:24 CET 2008 No sound device found boot: hda1:/boot/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200 hda: LBA 2049MB: SanDisk SDCFX-2048
FILO finds your CF.
Mounted ext2fs Found Linux version 2.6.18.2-34-default (geeko at buildhost) #1 SMP Mon Nov 27 11:46:27 UTC 2006 bzImage. Loading kernel... ok Jumping to entry point... Linux version 2.6.18.2-34-default (geeko at buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
..
VFS: Cannot open root device "hda1" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
But the IDE controller and CF card is not found by the kernel. It does not even look for them. Please make sure you use a kernel which has built-in support for whatever hardware you need in order to boot your system, unless you also specify a ramdisk that FILO should load.
//Peter
Starting my systems with original BIOS installed OS (zenwalk) starts without any problems. But just changing BIOS to coreboot posted problems raise. So I don't think this could be a problem on used kernel.
Because of changing BIOS I think something in coreboot is different to original BIOS. But I don't know what this could be. So I hope some here could give me a hint.
Greetings Klaus