I am trying to load a kernel over Etherboot, and am having some problems doing so. I am using etherboot version 5.2.2, and mkelfImage 2.5 released 24 April 2003. Here is the output I get:
-->
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3
Loading Etherboot version: 5.2.2 ROM segment 0x2e81 length 0x7938 reloc 0x00020000 CPU 1664 Mhz Etherboot 5.2.2 (GPL) http://etherboot.org Tagged ELF for [3C90X] get_memsizes | linuxbios Relocating _text from: [000244e0,00034330) to [efef01b0,eff00000) Probing pci nic... [3c905b-tpo100]
3C90X Driver 2.00 Copyright 1999 LightSys Technology Services, Inc. Portions Copyright 1999 Steve Smith Provided with ABSOLUTELY NO WARRANTY. ------------------------------------------------------------------------------- MAC Address = 00:10:5A:A2:5A:82 Connectors present: 10Base-T / 100Base-TX. Searching for server (DHCP)... Me: 192.168.123.3, Server: 192.168.123.254, Gateway 192.168.123.254 Loading 192.168.123.254:vmlinuz.elf (ELF)... done Issuing RESET: elf_start | breakpoint = 0x0002ee44
<--
Do I have the correct versions of Etherboot and mkelfImage? I have booted this kernel on this machine fine before (when it was burned into flash and booted directly from LinuxBIOS). Do I need to change anything in the targets Config.lb when I run etherboot, or should it be the same as when I burn the kernel into flash? I am also able to boot the kernel over Etherboot fine on another one of my machines booting etherboot from a floppy. On the machine in question, Etherboot is the payload of LinuxBIOS. Please help!
Thanks, Jeff Stevens
__________________________________ Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! http://promotions.yahoo.com/new_mail