Re: [coreboot] flashrom issues found??

Quoting [e-mail]:
> Quoting Carl-Daniel Hailfinger :
> > On 14.03.2008 01:21, [e-mail] wrote:
> > > I han't had a chance to test it yet but I think if I just modify
> > > flashchips.c to say this it may work:
> > >
> > > {"M50FW080", ST_ID, ST_M50FW080, 1024, 64 * 1024, probe_jedec,
> > > erase_lhf00l04, write_lhf00l04},
> > >
> > > I will test it and report back, with a patch hopefully?
> >
> > That would be cool. However, considering Ron's comments, could you use
> > erase_82802ab,  write_82802ab instead? They are available again in
> > latest flashrom and are functionally identical to the *_lhf00l04 functions.
>
> Ahhhhhh:-( Here is what is happening with the above change:
>
> [root@localhost ~]# flashrom -r test.rom
> Calibrating delay loop... OK.
> Found coreboot table at 0x00000530.
> Vendor ID: RCA, part ID: RM4100
> Found chipset "Intel ICH4/ICH4-L", enabling flash write... OK.
> NOT FOUND RCA:RM4100
> M50FW080 found at physical address 0xfff00000.
> Flash part is M50FW080 (1024 KB).
> Reading Flash...done
> [root@localhost ~]# flashrom -E
> Calibrating delay loop... OK.
> Found coreboot table at 0x00000530.
> Vendor ID: RCA, part ID: RM4100
> Found chipset "Intel ICH4/ICH4-L", enabling flash write... OK.
> NOT FOUND RCA:RM4100
> M50FW080 found at physical address 0xfff00000.
> Flash part is M50FW080 (1024 KB).
> Erasing flash chip
> total_size is 1048576; flash->page_size is 65536
> Erase at 0xb7dcc000
> Ready:BE RUN/FINISH:BE OK:PROG OK:VPP OK:PROG RUN/FINISH:UNLOCK:write
> protect is at 0x2
> Segmentation fault
> [root@localhost ~]# flashrom -w test.rom
> Calibrating delay loop... OK.
> Found coreboot table at 0x00000530.
> Vendor ID: RCA, part ID: RM4100
> Found chipset "Intel ICH4/ICH4-L", enabling flash write... OK.
> NOT FOUND RCA:RM4100
> M50FW080 found at physical address 0xfff00000.
> Flash part is M50FW080 (1024 KB).
> total_size is 1048576; flash->page_size is 65536
> Erase at 0xb7d2e000
> Ready:BE RUN/FINISH:BE OK:PROG OK:VPP OK:PROG RUN/FINISH:UNLOCK:write
> protect is at 0x2
> Segmentation fault
> [root@localhost ~]# flashrom -v test.rom
> Calibrating delay loop... OK.
> Found coreboot table at 0x00000530.
> Vendor ID: RCA, part ID: RM4100
> Found chipset "Intel ICH4/ICH4-L", enabling flash write... OK.
> NOT FOUND RCA:RM4100
> M50FW080 found at physical address 0xfff00000.
> Flash part is M50FW080 (1024 KB).
> Verifying flash... VERIFIED.
> [root@localhost ~]#
>
> Help?

can't I just setup a m50fw080.c because it is obvious what we have is  
not working.......

Thanks - Joe