flashrom: Use helper functions to access flash chips.
Right now we perform direct pointer manipulation without any abstraction to read from and write to memory mapped flash chips. That makes it impossible to drive any flasher which does not mmap the whole chip.
Using helper functions readb() and writeb() allows a driver for external flash programmers like Paraflasher to replace readb and writeb with calls to its own chip access routines.
This patch has the additional advantage of removing lots of unnecessary casts to volatile uint8_t * and now-superfluous parentheses which caused poor readability.
Please note that this patch works, but the conversion is not complete yet (reads outside assignments are not converted).
I used the semantic patcher Coccinelle to create this patch. The semantic patch follows: @@ expression a; typedef uint8_t; volatile uint8_t *b; @@ - *b = a; + writeb(a, b); @@ expression a; volatile uint8_t *b; @@ - a = *b; + a = readb(b); @@ type T; T b; expression a; @@ writeb(a, -(T) b); @@ type T; T b; expression a; @@ a = readb( -(T) b); @@ expression a, b; @@ writeb(a, -( b -) ); @@ expression a, b; @@ a = readb( -( b -) );
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: flashrom-inband_chipaccess_helper_functions/flash.h =================================================================== --- flashrom-inband_chipaccess_helper_functions/flash.h (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/flash.h (Arbeitskopie) @@ -58,6 +58,36 @@ #define INL inl #endif
+static inline void writeb(uint8_t b, volatile void *addr) +{ + *(volatile uint8_t *) addr = b; +} + +static inline void writew(uint16_t b, volatile void *addr) +{ + *(volatile uint16_t *) addr = b; +} + +static inline void writel(uint32_t b, volatile void *addr) +{ + *(volatile uint32_t *) addr = b; +} + +static inline uint8_t readb(const volatile void *addr) +{ + return *(volatile uint8_t *) addr; +} + +static inline uint16_t readw(const volatile void *addr) +{ + return *(volatile uint16_t *) addr; +} + +static inline uint32_t readl(const volatile void *addr) +{ + return *(volatile uint32_t *) addr; +} + #define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
struct flashchip { Index: flashrom-inband_chipaccess_helper_functions/pm49fl00x.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/pm49fl00x.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/pm49fl00x.c (Arbeitskopie) @@ -35,7 +35,7 @@ if (block_size == 16384 && i % 2) continue;
- *(bios + (i * block_size) + 2) = bits; + writeb(bits, bios + (i * block_size) + 2); } }
Index: flashrom-inband_chipaccess_helper_functions/en29f002a.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/en29f002a.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/en29f002a.c (Arbeitskopie) @@ -35,19 +35,19 @@ volatile uint8_t *bios = flash->virtual_memory; uint8_t id1, id2;
- *(volatile uint8_t *)(bios + 0x555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AA) = 0x55; - *(volatile uint8_t *)(bios + 0x555) = 0x90; + writeb(0xAA, bios + 0x555); + writeb(0x55, bios + 0x2AA); + writeb(0x90, bios + 0x555);
myusec_delay(10);
- id1 = *(volatile uint8_t *)(bios + 0x100); - id2 = *(volatile uint8_t *)(bios + 0x101); + id1 = readb(bios + 0x100); + id2 = readb(bios + 0x101);
/* exit by writing F0 anywhere? or the code below */ - *(volatile uint8_t *)(bios + 0x555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AA) = 0x55; - *(volatile uint8_t *)(bios + 0x555) = 0xF0; + writeb(0xAA, bios + 0x555); + writeb(0x55, bios + 0x2AA); + writeb(0xF0, bios + 0x555);
printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __FUNCTION__, id1, id2);
@@ -68,19 +68,19 @@ volatile uint8_t *bios = flash->virtual_memory; uint8_t id1, id2;
- *(volatile uint8_t *)(bios + 0x555) = 0xAA; - *(volatile uint8_t *)(bios + 0xAAA) = 0x55; - *(volatile uint8_t *)(bios + 0x555) = 0x90; + writeb(0xAA, bios + 0x555); + writeb(0x55, bios + 0xAAA); + writeb(0x90, bios + 0x555);
myusec_delay(10);
- id1 = *(volatile uint8_t *)(bios + 0x100); - id2 = *(volatile uint8_t *)(bios + 0x101); + id1 = readb(bios + 0x100); + id2 = readb(bios + 0x101);
/* exit by writing F0 anywhere? or the code below */ - *(volatile uint8_t *)(bios + 0x555) = 0xAA; - *(volatile uint8_t *)(bios + 0xAAA) = 0x55; - *(volatile uint8_t *)(bios + 0x555) = 0xF0; + writeb(0xAA, bios + 0x555); + writeb(0x55, bios + 0xAAA); + writeb(0xF0, bios + 0x555);
printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2);
@@ -107,10 +107,10 @@ /* write to the sector */ if ((i & 0xfff) == 0) printf("address: 0x%08lx", (unsigned long)i); - *(bios + 0x5555) = 0xAA; - *(bios + 0x2AAA) = 0x55; - *(bios + 0x5555) = 0xA0; - *dst++ = *buf++; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xA0, bios + 0x5555); + writeb(*buf++, dst++);
/* wait for Toggle bit ready */ toggle_ready_jedec(dst); Index: flashrom-inband_chipaccess_helper_functions/jedec.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/jedec.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/jedec.c (Arbeitskopie) @@ -68,21 +68,21 @@
void unprotect_jedec(volatile uint8_t *bios) { - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0x80; - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0x20; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0x80, bios + 0x5555); + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0x20, bios + 0x5555);
usleep(200); }
void protect_jedec(volatile uint8_t *bios) { - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0xA0; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xA0, bios + 0x5555);
usleep(200); } @@ -94,40 +94,40 @@ uint32_t largeid1, largeid2;
/* Issue JEDEC Product ID Entry command */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0x90; + writeb(0x90, bios + 0x5555); /* Older chips may need up to 100 us to respond. The ATMEL 29C020 * needs 10 ms according to the data sheet. */ myusec_delay(10000);
/* Read product ID */ - id1 = *(volatile uint8_t *)bios; - id2 = *(volatile uint8_t *)(bios + 0x01); + id1 = readb(bios); + id2 = readb(bios + 0x01); largeid1 = id1; largeid2 = id2;
/* Check if it is a continuation ID, this should be a while loop. */ if (id1 == 0x7F) { largeid1 <<= 8; - id1 = *(volatile uint8_t *)(bios + 0x100); + id1 = readb(bios + 0x100); largeid1 |= id1; } if (id2 == 0x7F) { largeid2 <<= 8; - id2 = *(volatile uint8_t *)(bios + 0x101); + id2 = readb(bios + 0x101); largeid2 |= id2; }
/* Issue JEDEC Product ID Exit command */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0xF0; + writeb(0xF0, bios + 0x5555); myusec_delay(40);
printf_debug("%s: id1 0x%02x, id2 0x%02x", __FUNCTION__, largeid1, largeid2); @@ -143,18 +143,18 @@ int erase_sector_jedec(volatile uint8_t *bios, unsigned int page) { /* Issue the Sector Erase command */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0x80; + writeb(0x80, bios + 0x5555); myusec_delay(10);
- *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + page) = 0x30; + writeb(0x30, bios + page); myusec_delay(10);
/* wait for Toggle bit ready */ @@ -166,18 +166,18 @@ int erase_block_jedec(volatile uint8_t *bios, unsigned int block) { /* Issue the Sector Erase command */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0x80; + writeb(0x80, bios + 0x5555); myusec_delay(10);
- *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + block) = 0x50; + writeb(0x50, bios + block); myusec_delay(10);
/* wait for Toggle bit ready */ @@ -191,18 +191,18 @@ volatile uint8_t *bios = flash->virtual_memory;
/* Issue the JEDEC Chip Erase command */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0x80; + writeb(0x80, bios + 0x5555); myusec_delay(10);
- *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0x10; + writeb(0x10, bios + 0x5555); myusec_delay(10);
toggle_ready_jedec(bios); @@ -219,15 +219,15 @@
retry: /* Issue JEDEC Data Unprotect comand */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0xA0; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xA0, bios + 0x5555);
/* transfer data from source to destination */ for (i = start_index; i < page_size; i++) { /* If the data is 0xFF, don't program it */ if (*src != 0xFF) - *dst = *src; + writeb(*src, dst); dst++; src++; } @@ -269,12 +269,12 @@
retry: /* Issue JEDEC Byte Program command */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0xA0; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xA0, bios + 0x5555);
/* transfer data from source to destination */ - *dst = *src; + writeb(*src, dst); toggle_ready_jedec(bios);
if (*dst != *src && tried++ < MAX_REFLASH_TRIES) { Index: flashrom-inband_chipaccess_helper_functions/w29ee011.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/w29ee011.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/w29ee011.c (Arbeitskopie) @@ -37,29 +37,29 @@ }
/* Issue JEDEC Product ID Entry command */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0x80; + writeb(0x80, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0x60; + writeb(0x60, bios + 0x5555); myusec_delay(10);
/* Read product ID */ - id1 = *(volatile uint8_t *)bios; - id2 = *(volatile uint8_t *)(bios + 0x01); + id1 = readb(bios); + id2 = readb(bios + 0x01);
/* Issue JEDEC Product ID Exit command */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0xF0; + writeb(0xF0, bios + 0x5555); myusec_delay(10);
printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __FUNCTION__, id1, id2); Index: flashrom-inband_chipaccess_helper_functions/sst49lfxxxc.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/sst49lfxxxc.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/sst49lfxxxc.c (Arbeitskopie) @@ -50,20 +50,20 @@ //printf("bios=0x%08lx\n", (unsigned long)bios); for (i = 0; left > 65536; i++, left -= 65536) { //printf("lockbits at address=0x%08lx is 0x%01x\n", (unsigned long)0xFFC00000 - size + (i * 65536) + 2, *(bios + (i * 65536) + 2) ); - *(bios + (i * 65536) + 2) = bits; + writeb(bits, bios + (i * 65536) + 2); } address = i * 65536; //printf("lockbits at address=0x%08lx is 0x%01x\n", (unsigned long)0xFFc00000 - size + address + 2, *(bios + address + 2) ); - *(bios + address + 2) = bits; + writeb(bits, bios + address + 2); address += 32768; //printf("lockbits at address=0x%08lx is 0x%01x\n", (unsigned long)0xFFc00000 - size + address + 2, *(bios + address + 2) ); - *(bios + address + 2) = bits; + writeb(bits, bios + address + 2); address += 8192; //printf("lockbits at address=0x%08lx is 0x%01x\n", (unsigned long)0xFFc00000 - size + address + 2, *(bios + address + 2) ); - *(bios + address + 2) = bits; + writeb(bits, bios + address + 2); address += 8192; //printf("lockbits at address=0x%08lx is 0x%01x\n", (unsigned long)0xFFc00000 - size + address + 2, *(bios + address + 2) ); - *(bios + address + 2) = bits; + writeb(bits, bios + address + 2);
return 0; } @@ -73,14 +73,14 @@ { unsigned char status;
- *bios = SECTOR_ERASE; - *(bios + address) = ERASE; + writeb(SECTOR_ERASE, bios); + writeb(ERASE, bios + address);
do { - status = *bios; + status = readb(bios); if (status & (STATUS_ESS | STATUS_BPS)) { printf("sector erase FAILED at address=0x%08lx status=0x%01x\n", (unsigned long)bios + address, status); - *bios = CLEAR_STATUS; + writeb(CLEAR_STATUS, bios); return (-1); } } while (!(status & STATUS_WSMS)); @@ -96,7 +96,7 @@ int i; unsigned char status;
- *bios = CLEAR_STATUS; + writeb(CLEAR_STATUS, bios); for (i = 0; i < page_size; i++) { /* transfer data from source to destination */ if (*src == 0xFF) { @@ -105,14 +105,14 @@ continue; } /*issue AUTO PROGRAM command */ - *bios = AUTO_PGRM; - *dst++ = *src++; + writeb(AUTO_PGRM, bios); + writeb(*src++, dst++);
do { - status = *bios; + status = readb(bios); if (status & (STATUS_ESS | STATUS_BPS)) { printf("sector write FAILED at address=0x%08lx status=0x%01x\n", (unsigned long)dst, status); - *bios = CLEAR_STATUS; + writeb(CLEAR_STATUS, bios); return (-1); } } while (!(status & STATUS_WSMS)); @@ -127,13 +127,13 @@
uint8_t id1, id2;
- *bios = RESET; + writeb(RESET, bios);
- *bios = READ_ID; - id1 = *(volatile uint8_t *)bios; - id2 = *(volatile uint8_t *)(bios + 0x01); + writeb(READ_ID, bios); + id1 = readb(bios); + id2 = readb(bios + 0x01);
- *bios = RESET; + writeb(RESET, bios);
printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __FUNCTION__, id1, id2);
@@ -157,7 +157,7 @@ if (erase_sector_49lfxxxc(bios, i) != 0) return (-1);
- *bios = RESET; + writeb(RESET, bios);
return 0; } @@ -183,7 +183,7 @@ } printf("\n");
- *bios = RESET; + writeb(RESET, bios);
return 0; } Index: flashrom-inband_chipaccess_helper_functions/sharplhf00l04.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/sharplhf00l04.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/sharplhf00l04.c (Arbeitskopie) @@ -46,18 +46,18 @@ *(volatile uint8_t *)(bios + 0x5555) = 0x90; #endif
- *bios = 0xff; + writeb(0xff, bios); myusec_delay(10); - *bios = 0x90; + writeb(0x90, bios); myusec_delay(10);
- id1 = *(volatile uint8_t *)bios; - id2 = *(volatile uint8_t *)(bios + 0x01); + id1 = readb(bios); + id2 = readb(bios + 0x01);
/* Leave ID mode */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0xF0; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xF0, bios + 0x5555);
myusec_delay(10);
@@ -76,25 +76,25 @@ uint8_t status; uint8_t id1, id2;
- *bios = 0x70; + writeb(0x70, bios); if ((*bios & 0x80) == 0) { // it's busy while ((*bios & 0x80) == 0) ; }
- status = *bios; + status = readb(bios);
// put another command to get out of status register mode
- *bios = 0x90; + writeb(0x90, bios); myusec_delay(10);
- id1 = *(volatile uint8_t *)bios; - id2 = *(volatile uint8_t *)(bios + 0x01); + id1 = readb(bios); + id2 = readb(bios + 0x01);
// this is needed to jam it out of "read id" mode - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0xF0; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xF0, bios + 0x5555);
return status; } @@ -106,19 +106,19 @@ uint8_t status;
// clear status register - *bios = 0x50; + writeb(0x50, bios); printf("Erase at %p\n", bios); status = wait_lhf00l04(flash->virtual_memory); print_lhf00l04_status(status); // clear write protect printf("write protect is at %p\n", (wrprotect)); printf("write protect is 0x%x\n", *(wrprotect)); - *(wrprotect) = 0; + writeb(0, wrprotect); printf("write protect is 0x%x\n", *(wrprotect));
// now start it - *(volatile uint8_t *)(bios) = 0x20; - *(volatile uint8_t *)(bios) = 0xd0; + writeb(0x20, bios); + writeb(0xd0, bios); myusec_delay(10); // now let's see what the register is status = wait_lhf00l04(flash->virtual_memory); @@ -149,8 +149,8 @@
for (i = 0; i < page_size; i++) { /* transfer data from source to destination */ - *dst = 0x40; - *dst++ = *src++; + writeb(0x40, dst); + writeb(*src++, dst++); wait_lhf00l04(bios); } } Index: flashrom-inband_chipaccess_helper_functions/m29f002.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/m29f002.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/m29f002.c (Arbeitskopie) @@ -22,12 +22,12 @@
int erase_m29f002(struct flashchip *flash) { volatile uint8_t *bios = flash->virtual_memory; - *(volatile uint8_t *)(bios + 0x555) = 0xaa; - *(volatile uint8_t *)(bios + 0xaaa) = 0x55; - *(volatile uint8_t *)(bios + 0x555) = 0x80; - *(volatile uint8_t *)(bios + 0x555) = 0xaa; - *(volatile uint8_t *)(bios + 0xaaa) = 0x55; - *(volatile uint8_t *)(bios + 0x555) = 0x10; + writeb(0xaa, bios + 0x555); + writeb(0x55, bios + 0xaaa); + writeb(0x80, bios + 0x555); + writeb(0xaa, bios + 0x555); + writeb(0x55, bios + 0xaaa); + writeb(0x10, bios + 0x555); myusec_delay(10); toggle_ready_jedec(bios); return 0; @@ -35,21 +35,21 @@
static void rewrite_block(volatile uint8_t *bios, uint8_t *src, volatile uint8_t *dst, int size) { /* erase */ - *(volatile uint8_t *)(bios + 0x555) = 0xaa; - *(volatile uint8_t *)(bios + 0xaaa) = 0x55; - *(volatile uint8_t *)(bios + 0x555) = 0x80; - *(volatile uint8_t *)(bios + 0x555) = 0xaa; - *(volatile uint8_t *)(bios + 0xaaa) = 0x55; - *dst = 0x30; + writeb(0xaa, bios + 0x555); + writeb(0x55, bios + 0xaaa); + writeb(0x80, bios + 0x555); + writeb(0xaa, bios + 0x555); + writeb(0x55, bios + 0xaaa); + writeb(0x30, dst); myusec_delay(10); toggle_ready_jedec(bios);
/* program */ while (size--) { - *(volatile uint8_t *)(bios + 0x555) = 0xaa; - *(volatile uint8_t *)(bios + 0xaaa) = 0x55; - *(volatile uint8_t *)(bios + 0x555) = 0xa0; - *dst = *src; + writeb(0xaa, bios + 0x555); + writeb(0x55, bios + 0xaaa); + writeb(0xa0, bios + 0x555); + writeb(*src, dst); toggle_ready_jedec(dst); dst++; src++; Index: flashrom-inband_chipaccess_helper_functions/w39v040c.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/w39v040c.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/w39v040c.c (Arbeitskopie) @@ -26,22 +26,22 @@ volatile uint8_t *bios = flash->virtual_memory; uint8_t id1, id2, lock;
- *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0x90; + writeb(0x90, bios + 0x5555); myusec_delay(10);
- id1 = *(volatile uint8_t *)bios; - id2 = *(volatile uint8_t *)(bios + 1); - lock = *(volatile uint8_t *)(bios + 0xfff2); + id1 = readb(bios); + id2 = readb(bios + 1); + lock = readb(bios + 0xfff2);
- *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0xF0; + writeb(0xF0, bios + 0x5555); myusec_delay(40);
printf_debug("%s: id1 0x%02x, id2 0x%02x", __func__, id1, id2); Index: flashrom-inband_chipaccess_helper_functions/sst28sf040.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/sst28sf040.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/sst28sf040.c (Arbeitskopie) @@ -35,13 +35,13 @@ /* ask compiler not to optimize this */ volatile uint8_t tmp;
- tmp = *(volatile uint8_t *)(bios + 0x1823); - tmp = *(volatile uint8_t *)(bios + 0x1820); - tmp = *(volatile uint8_t *)(bios + 0x1822); - tmp = *(volatile uint8_t *)(bios + 0x0418); - tmp = *(volatile uint8_t *)(bios + 0x041B); - tmp = *(volatile uint8_t *)(bios + 0x0419); - tmp = *(volatile uint8_t *)(bios + 0x040A); + tmp = readb(bios + 0x1823); + tmp = readb(bios + 0x1820); + tmp = readb(bios + 0x1822); + tmp = readb(bios + 0x0418); + tmp = readb(bios + 0x041B); + tmp = readb(bios + 0x0419); + tmp = readb(bios + 0x040A); }
static __inline__ void unprotect_28sf040(volatile uint8_t *bios) @@ -49,20 +49,20 @@ /* ask compiler not to optimize this */ volatile uint8_t tmp;
- tmp = *(volatile uint8_t *)(bios + 0x1823); - tmp = *(volatile uint8_t *)(bios + 0x1820); - tmp = *(volatile uint8_t *)(bios + 0x1822); - tmp = *(volatile uint8_t *)(bios + 0x0418); - tmp = *(volatile uint8_t *)(bios + 0x041B); - tmp = *(volatile uint8_t *)(bios + 0x0419); - tmp = *(volatile uint8_t *)(bios + 0x041A); + tmp = readb(bios + 0x1823); + tmp = readb(bios + 0x1820); + tmp = readb(bios + 0x1822); + tmp = readb(bios + 0x0418); + tmp = readb(bios + 0x041B); + tmp = readb(bios + 0x0419); + tmp = readb(bios + 0x041A); }
static __inline__ int erase_sector_28sf040(volatile uint8_t *bios, unsigned long address) { - *bios = AUTO_PG_ERASE1; - *(bios + address) = AUTO_PG_ERASE2; + writeb(AUTO_PG_ERASE1, bios); + writeb(AUTO_PG_ERASE2, bios + address);
/* wait for Toggle bit ready */ toggle_ready_jedec(bios); @@ -85,8 +85,8 @@ continue; } /*issue AUTO PROGRAM command */ - *dst = AUTO_PGRM; - *dst++ = *src++; + writeb(AUTO_PGRM, dst); + writeb(*src++, dst++);
/* wait for Toggle bit ready */ toggle_ready_jedec(bios); @@ -100,16 +100,16 @@ volatile uint8_t *bios = flash->virtual_memory; uint8_t id1, id2;
- *bios = RESET; + writeb(RESET, bios); myusec_delay(10);
- *bios = READ_ID; + writeb(READ_ID, bios); myusec_delay(10); - id1 = *(volatile uint8_t *)bios; + id1 = readb(bios); myusec_delay(10); - id2 = *(volatile uint8_t *)(bios + 0x01); + id2 = readb(bios + 0x01);
- *bios = RESET; + writeb(RESET, bios); myusec_delay(10);
printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __FUNCTION__, id1, id2); @@ -124,8 +124,8 @@ volatile uint8_t *bios = flash->virtual_memory;
unprotect_28sf040(bios); - *bios = CHIP_ERASE; - *bios = CHIP_ERASE; + writeb(CHIP_ERASE, bios); + writeb(CHIP_ERASE, bios); protect_28sf040(bios);
myusec_delay(10); Index: flashrom-inband_chipaccess_helper_functions/stm50flw0x0x.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/stm50flw0x0x.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/stm50flw0x0x.c (Arbeitskopie) @@ -33,9 +33,9 @@
void protect_stm50flw0x0x(volatile uint8_t *bios) { - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0xA0; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xA0, bios + 0x5555);
usleep(200); } @@ -47,37 +47,37 @@ uint32_t largeid1, largeid2;
/* Issue JEDEC Product ID Entry command */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0x90; + writeb(0x90, bios + 0x5555); myusec_delay(40);
/* Read product ID */ - id1 = *(volatile uint8_t *)bios; - id2 = *(volatile uint8_t *)(bios + 0x01); + id1 = readb(bios); + id2 = readb(bios + 0x01); largeid1 = id1; largeid2 = id2;
/* Check if it is a continuation ID, this should be a while loop. */ if (id1 == 0x7F) { largeid1 <<= 8; - id1 = *(volatile uint8_t *)(bios + 0x100); + id1 = readb(bios + 0x100); largeid1 |= id1; } if (id2 == 0x7F) { largeid2 <<= 8; - id2 = *(volatile uint8_t *)(bios + 0x101); + id2 = readb(bios + 0x101); largeid2 |= id2; }
/* Issue JEDEC Product ID Exit command */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; + writeb(0xAA, bios + 0x5555); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; + writeb(0x55, bios + 0x2AAA); myusec_delay(10); - *(volatile uint8_t *)(bios + 0x5555) = 0xF0; + writeb(0xF0, bios + 0x5555); myusec_delay(40);
printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __FUNCTION__, largeid1, @@ -96,21 +96,21 @@ uint8_t id1; // id2;
- *bios = 0x70; + writeb(0x70, bios); if ((*bios & 0x80) == 0) { // it's busy while ((*bios & 0x80) == 0) ; } // put another command to get out of status register mode
- *bios = 0x90; + writeb(0x90, bios); myusec_delay(10);
- id1 = *(volatile uint8_t *)bios; + id1 = readb(bios);
// this is needed to jam it out of "read id" mode - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0xF0; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xF0, bios + 0x5555); }
/* @@ -142,7 +142,7 @@ // unlock each 4k-sector for (j = 0; j < 0x10000; j += 0x1000) { printf_debug("unlocking at 0x%x\n", offset + j); - *(flash_addr + offset + j) = unlock_sector; + writeb(unlock_sector, flash_addr + offset + j); if (*(flash_addr + offset + j) != unlock_sector) { printf("Cannot unlock sector @ 0x%x\n", offset + j); @@ -151,7 +151,7 @@ } } else { printf_debug("unlocking at 0x%x\n", offset); - *(flash_addr + offset) = unlock_sector; + writeb(unlock_sector, flash_addr + offset); if (*(flash_addr + offset) != unlock_sector) { printf("Cannot unlock sector @ 0x%x\n", offset); return -1; @@ -167,11 +167,11 @@ int j;
// clear status register - *bios = 0x50; + writeb(0x50, bios); printf_debug("Erase at %p\n", bios); // now start it - *(volatile uint8_t *)(bios) = 0x20; - *(volatile uint8_t *)(bios) = 0xd0; + writeb(0x20, bios); + writeb(0xd0, bios); myusec_delay(10);
wait_stm50flw0x0x(flash->virtual_memory); @@ -197,8 +197,8 @@
/* transfer data from source to destination */ for (i = 0; i < page_size; i++) { - *dst = 0x40; - *dst++ = *src++; + writeb(0x40, dst); + writeb(*src++, dst++); wait_stm50flw0x0x(bios); }
Index: flashrom-inband_chipaccess_helper_functions/am29f040b.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/am29f040b.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/am29f040b.c (Arbeitskopie) @@ -25,12 +25,12 @@ static __inline__ int erase_sector_29f040b(volatile uint8_t *bios, unsigned long address) { - *(bios + 0x555) = 0xAA; - *(bios + 0x2AA) = 0x55; - *(bios + 0x555) = 0x80; - *(bios + 0x555) = 0xAA; - *(bios + 0x2AA) = 0x55; - *(bios + address) = 0x30; + writeb(0xAA, bios + 0x555); + writeb(0x55, bios + 0x2AA); + writeb(0x80, bios + 0x555); + writeb(0xAA, bios + 0x555); + writeb(0x55, bios + 0x2AA); + writeb(0x30, bios + address);
sleep(2);
@@ -52,10 +52,10 @@ printf("0x%08lx", (unsigned long)dst - (unsigned long)bios);
- *(bios + 0x555) = 0xAA; - *(bios + 0x2AA) = 0x55; - *(bios + 0x555) = 0xA0; - *dst++ = *src++; + writeb(0xAA, bios + 0x555); + writeb(0x55, bios + 0x2AA); + writeb(0xA0, bios + 0x555); + writeb(*src++, dst++);
/* wait for Toggle bit ready */ toggle_ready_jedec(bios); @@ -72,14 +72,14 @@ volatile uint8_t *bios = flash->virtual_memory; uint8_t id1, id2;
- *(bios + 0x555) = 0xAA; - *(bios + 0x2AA) = 0x55; - *(bios + 0x555) = 0x90; + writeb(0xAA, bios + 0x555); + writeb(0x55, bios + 0x2AA); + writeb(0x90, bios + 0x555);
- id1 = *bios; - id2 = *(bios + 0x01); + id1 = readb(bios); + id2 = readb(bios + 0x01);
- *bios = 0xF0; + writeb(0xF0, bios);
myusec_delay(10);
@@ -94,12 +94,12 @@ { volatile uint8_t *bios = flash->virtual_memory;
- *(bios + 0x555) = 0xAA; - *(bios + 0x2AA) = 0x55; - *(bios + 0x555) = 0x80; - *(bios + 0x555) = 0xAA; - *(bios + 0x2AA) = 0x55; - *(bios + 0x555) = 0x10; + writeb(0xAA, bios + 0x555); + writeb(0x55, bios + 0x2AA); + writeb(0x80, bios + 0x555); + writeb(0xAA, bios + 0x555); + writeb(0x55, bios + 0x2AA); + writeb(0x10, bios + 0x555);
myusec_delay(10); toggle_ready_jedec(bios); Index: flashrom-inband_chipaccess_helper_functions/sst_fwhub.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/sst_fwhub.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/sst_fwhub.c (Arbeitskopie) @@ -51,7 +51,7 @@ volatile uint8_t *wrprotect = flash->virtual_registers + offset + 2;
// clear write protect - *(wrprotect) = 0; + writeb(0, wrprotect);
erase_block_jedec(flash->virtual_memory, offset); toggle_ready_jedec(flash->virtual_memory); Index: flashrom-inband_chipaccess_helper_functions/w39v080fa.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/w39v080fa.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/w39v080fa.c (Arbeitskopie) @@ -27,19 +27,19 @@ uint8_t vid, did;
/* Product Identification Entry */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0x90; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0x90, bios + 0x5555); myusec_delay(10);
/* Read product ID */ - vid = *(volatile uint8_t *)bios; - did = *(volatile uint8_t *)(bios + 0x01); + vid = readb(bios); + did = readb(bios + 0x01);
/* Product Identifixation Exit */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0xF0; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xF0, bios + 0x5555); myusec_delay(10);
printf_debug("%s: vid 0x%x, did 0x%x\n", __FUNCTION__, vid, did); @@ -60,14 +60,14 @@ printf_debug("Trying to unlock block @0x%08x = 0x%02x\n", offset, *wrprotect);
- locking = *wrprotect; + locking = readb(wrprotect); switch (locking & 0x7) { case 0: printf_debug("Full Access.\n"); return 0; case 1: printf_debug("Write Lock (Default State).\n"); - *wrprotect = 0; + writeb(0, wrprotect); return 0; case 2: printf_debug("Locked Open (Full Access, Lock Down).\n"); @@ -77,11 +77,11 @@ return -1; case 4: printf_debug("Read Lock.\n"); - *wrprotect = 0; + writeb(0, wrprotect); return 0; case 5: printf_debug("Read/Write Lock.\n"); - *wrprotect = 0; + writeb(0, wrprotect); return 0; case 6: fprintf(stderr, "Error: Read Lock, Locked Down.\n"); @@ -106,18 +106,18 @@ */
/* Product Identification Entry */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0x90; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0x90, bios + 0x5555); myusec_delay(10);
/* Read Hardware Lock Bits */ - locking = *(volatile uint8_t *)(bios + 0xffff2); + locking = readb(bios + 0xffff2);
/* Product Identification Exit */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0xF0; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xF0, bios + 0x5555); myusec_delay(10);
printf_debug("Lockout bits:\n"); @@ -151,13 +151,13 @@ printf("0x%08x\b\b\b\b\b\b\b\b\b\b", sector);
/* Sector Erase */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0x80; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0x80, bios + 0x5555);
- *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + sector) = 0x30; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0x30, bios + sector);
/* wait for Toggle bit ready */ toggle_ready_jedec(bios); Index: flashrom-inband_chipaccess_helper_functions/82802ab.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/82802ab.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/82802ab.c (Arbeitskopie) @@ -49,23 +49,23 @@ uint8_t id1, id2;
#if 0 - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0x90; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0x90, bios + 0x5555); #endif
- *bios = 0xff; + writeb(0xff, bios); myusec_delay(10); - *bios = 0x90; + writeb(0x90, bios); myusec_delay(10);
- id1 = *(volatile uint8_t *)bios; - id2 = *(volatile uint8_t *)(bios + 0x01); + id1 = readb(bios); + id2 = readb(bios + 0x01);
/* Leave ID mode */ - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0xF0; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xF0, bios + 0x5555);
myusec_delay(10);
@@ -84,25 +84,25 @@ uint8_t status; uint8_t id1, id2;
- *bios = 0x70; + writeb(0x70, bios); if ((*bios & 0x80) == 0) { // it's busy while ((*bios & 0x80) == 0) ; }
- status = *bios; + status = readb(bios);
// put another command to get out of status register mode
- *bios = 0x90; + writeb(0x90, bios); myusec_delay(10);
- id1 = *(volatile uint8_t *)bios; - id2 = *(volatile uint8_t *)(bios + 0x01); + id1 = readb(bios); + id2 = readb(bios + 0x01);
// this is needed to jam it out of "read id" mode - *(volatile uint8_t *)(bios + 0x5555) = 0xAA; - *(volatile uint8_t *)(bios + 0x2AAA) = 0x55; - *(volatile uint8_t *)(bios + 0x5555) = 0xF0; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xF0, bios + 0x5555);
return status; } @@ -115,17 +115,17 @@ uint8_t status;
// clear status register - *bios = 0x50; + writeb(0x50, bios); //printf("Erase at %p\n", bios); // clear write protect //printf("write protect is at %p\n", (wrprotect)); //printf("write protect is 0x%x\n", *(wrprotect)); - *(wrprotect) = 0; + writeb(0, wrprotect); //printf("write protect is 0x%x\n", *(wrprotect));
// now start it - *(volatile uint8_t *)(bios) = 0x20; - *(volatile uint8_t *)(bios) = 0xd0; + writeb(0x20, bios); + writeb(0xd0, bios); myusec_delay(10); // now let's see what the register is status = wait_82802ab(flash->virtual_memory); @@ -162,8 +162,8 @@
for (i = 0; i < page_size; i++) { /* transfer data from source to destination */ - *dst = 0x40; - *dst++ = *src++; + writeb(0x40, dst); + writeb(*src++, dst++); wait_82802ab(bios); } } Index: flashrom-inband_chipaccess_helper_functions/m29f400bt.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/m29f400bt.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/m29f400bt.c (Arbeitskopie) @@ -22,9 +22,9 @@
void protect_m29f400bt(volatile uint8_t *bios) { - *(volatile uint8_t *)(bios + 0xAAA) = 0xAA; - *(volatile uint8_t *)(bios + 0x555) = 0x55; - *(volatile uint8_t *)(bios + 0xAAA) = 0xA0; + writeb(0xAA, bios + 0xAAA); + writeb(0x55, bios + 0x555); + writeb(0xA0, bios + 0xAAA);
usleep(200); } @@ -35,12 +35,12 @@ int i;
for (i = 0; i < page_size; i++) { - *(volatile uint8_t *)(bios + 0xAAA) = 0xAA; - *(volatile uint8_t *)(bios + 0x555) = 0x55; - *(volatile uint8_t *)(bios + 0xAAA) = 0xA0; + writeb(0xAA, bios + 0xAAA); + writeb(0x55, bios + 0x555); + writeb(0xA0, bios + 0xAAA);
/* transfer data from source to destination */ - *dst = *src; + writeb(*src, dst); //*(volatile char *) (bios) = 0xF0; //usleep(5); toggle_ready_jedec(dst); @@ -57,21 +57,21 @@ volatile uint8_t *bios = flash->virtual_memory; uint8_t id1, id2;
- *(volatile uint8_t *)(bios + 0xAAA) = 0xAA; - *(volatile uint8_t *)(bios + 0x555) = 0x55; - *(volatile uint8_t *)(bios + 0xAAA) = 0x90; + writeb(0xAA, bios + 0xAAA); + writeb(0x55, bios + 0x555); + writeb(0x90, bios + 0xAAA);
myusec_delay(10);
- id1 = *(volatile uint8_t *)bios; + id1 = readb(bios); /* The data sheet says id2 is at (bios + 0x01) and id2 listed in * flash.h does not match. It should be possible to use JEDEC probe. */ - id2 = *(volatile uint8_t *)(bios + 0x02); + id2 = readb(bios + 0x02);
- *(volatile uint8_t *)(bios + 0xAAA) = 0xAA; - *(volatile uint8_t *)(bios + 0x555) = 0x55; - *(volatile uint8_t *)(bios + 0xAAA) = 0xF0; + writeb(0xAA, bios + 0xAAA); + writeb(0x55, bios + 0x555); + writeb(0xF0, bios + 0xAAA);
myusec_delay(10);
@@ -87,13 +87,13 @@ { volatile uint8_t *bios = flash->virtual_memory;
- *(volatile uint8_t *)(bios + 0xAAA) = 0xAA; - *(volatile uint8_t *)(bios + 0x555) = 0x55; - *(volatile uint8_t *)(bios + 0xAAA) = 0x80; + writeb(0xAA, bios + 0xAAA); + writeb(0x55, bios + 0x555); + writeb(0x80, bios + 0xAAA);
- *(volatile uint8_t *)(bios + 0xAAA) = 0xAA; - *(volatile uint8_t *)(bios + 0x555) = 0x55; - *(volatile uint8_t *)(bios + 0xAAA) = 0x10; + writeb(0xAA, bios + 0xAAA); + writeb(0x55, bios + 0x555); + writeb(0x10, bios + 0xAAA);
myusec_delay(10); toggle_ready_jedec(bios); @@ -104,14 +104,14 @@ int block_erase_m29f400bt(volatile uint8_t *bios, volatile uint8_t *dst) {
- *(volatile uint8_t *)(bios + 0xAAA) = 0xAA; - *(volatile uint8_t *)(bios + 0x555) = 0x55; - *(volatile uint8_t *)(bios + 0xAAA) = 0x80; + writeb(0xAA, bios + 0xAAA); + writeb(0x55, bios + 0x555); + writeb(0x80, bios + 0xAAA);
- *(volatile uint8_t *)(bios + 0xAAA) = 0xAA; - *(volatile uint8_t *)(bios + 0x555) = 0x55; + writeb(0xAA, bios + 0xAAA); + writeb(0x55, bios + 0x555); //*(volatile uint8_t *) (bios + 0xAAA) = 0x10; - *dst = 0x30; + writeb(0x30, dst);
myusec_delay(10); toggle_ready_jedec(bios); Index: flashrom-inband_chipaccess_helper_functions/mx29f002.c =================================================================== --- flashrom-inband_chipaccess_helper_functions/mx29f002.c (Revision 3970) +++ flashrom-inband_chipaccess_helper_functions/mx29f002.c (Arbeitskopie) @@ -27,14 +27,14 @@ volatile uint8_t *bios = flash->virtual_memory; uint8_t id1, id2;
- *(bios + 0x5555) = 0xAA; - *(bios + 0x2AAA) = 0x55; - *(bios + 0x5555) = 0x90; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0x90, bios + 0x5555);
- id1 = *(volatile uint8_t *)bios; - id2 = *(volatile uint8_t *)(bios + 0x01); + id1 = readb(bios); + id2 = readb(bios + 0x01);
- *bios = 0xF0; + writeb(0xF0, bios);
myusec_delay(10);
@@ -49,13 +49,13 @@ { volatile uint8_t *bios = flash->virtual_memory;
- *(bios + 0x555) = 0xF0; - *(bios + 0x555) = 0xAA; - *(bios + 0x2AA) = 0x55; - *(bios + 0x555) = 0x80; - *(bios + 0x555) = 0xAA; - *(bios + 0x2AA) = 0x55; - *(bios + 0x555) = 0x10; + writeb(0xF0, bios + 0x555); + writeb(0xAA, bios + 0x555); + writeb(0x55, bios + 0x2AA); + writeb(0x80, bios + 0x555); + writeb(0xAA, bios + 0x555); + writeb(0x55, bios + 0x2AA); + writeb(0x10, bios + 0x555);
myusec_delay(100); toggle_ready_jedec(bios); @@ -83,7 +83,7 @@ volatile uint8_t *bios = flash->virtual_memory; volatile uint8_t *dst = bios;
- *bios = 0xF0; + writeb(0xF0, bios); myusec_delay(10); erase_29f002(flash); //*bios = 0xF0; @@ -93,10 +93,10 @@ /* write to the sector */ if ((i & 0xfff) == 0) printf("address: 0x%08lx", (unsigned long)i); - *(bios + 0x5555) = 0xAA; - *(bios + 0x2AAA) = 0x55; - *(bios + 0x5555) = 0xA0; - *dst++ = *buf++; + writeb(0xAA, bios + 0x5555); + writeb(0x55, bios + 0x2AAA); + writeb(0xA0, bios + 0x5555); + writeb(*buf++, dst++);
/* wait for Toggle bit ready */ toggle_ready_jedec(dst);