On Sat, Apr 28, 2007 at 03:11:19PM +0200, Quux wrote:
do you think that PCI expansion ROM may be useful during the developing phase in order to avoid soldering as on an GA M57sli mobo ?
Not an expansion ROM, that suggests the ROM is part of a PCI expansion card (sound card, networking card, graphics card, RAID card etc) but some southbridges support decoding the BIOS address range to the PCI bus. There has to be a jumper for this on the board in order to work.
In that case, a simple PCI card could be designed with just a flash chip and probably little more, and this could be booted from.
The board would likely need to be double sided though, so not trivial to produce at home. (But prototype quality boards can be gotten fairly cheap.)
//Peter