Re: [LinuxBIOS] LinuxBIOS and VMWare

[Joe Pub]

Hi Lu,

I have changed the config as suggested, didn't realise that the PCI id's had
to be in numerical order.  Different result with VMWare now, it reports a
triple fault within the VMWare log, but that it as much as I can get from
it, still no serial output when VGA is on

Regards,
Joe

On 28/02/07, Lu, Yinghai  wrote:
> chip northbridge/intel/i440bx
>
> device pci_domain 0 on
>   device pci 0.0 on end     # host bridge
>   device pci 1.0 on end     # PCI bridge
>   device pci 10.0 on end     # SCSI storage controller
>   device pci 11.0 on end     # Ethernet controller
>   device pci 12.0 on end     # Audio controller
>
> device pci f.0 on       # VGA controller
>    chip drivers/pci/onboard
>     device pci f.0 on end
>     register "rom_address" = "0xfff80000"
>    end
>   end
>
> device pci 7.0 on      # ISA bridge
>   end
>  end
>
> =è
>
> chip northbridge/intel/i440bx
>
> device pci_domain 0 on
>   device pci 0.0 on end     # host bridge
>   device pci 1.0 on end     # PCI bridge
> device pci 7.0 on      # ISA bridge
>
> end
>
> chip drivers/pci/onboard
>     device pci f.0 on end
>     register "rom_address" = "0xfff80000"
>    end
>
> device pci 10.0 on end     # SCSI storage controller
>   device pci 11.0 on end     # Ethernet controller
>   device pci 12.0 on end     # Audio controller
>  end